Vivo DESK-V100EB User manual

Black Electric Single Motor Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v100eb
SKU: DESK-V100EB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
A (x1)
Le Crossbar
E (x1)
Motorized Leg
I (x1)
Controller
J (x1)
AC Adapter
K (x12)
Anti-Vibration Pad
S-A (x22)
M6x11mm Screw
S-B (x14)
M5x16mm Screw
NOTE: SOME HARDWARE MAY NOT BE USED
T-A (x1)
2mm Allen Wrench
T-B (x1)
5mm Allen Wrench
L (x2)
Cable Clip
F (x2)
Side Bracket
G (x2)
Foot
H (x1)
Sync Rod
B (x1)
Right Crossbar
C (x1)
Center Crossbar
D (x1)
Leg
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED
ELECTRICAL SAFETY INSTRUCTIONS
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
Phillips
Screwdriver

3
ASSEMBLY STEPS
STEP 1
Assemble Le Crossbar (A) to Leg (D) and Right Crossbar (B) to Motorized Leg (E) using M6x11mm
Screws (S-A) and 5mm Allen Wrench (T-B).
STEP 2
Secure Side Brackets (F) to Leg (D) and Motorized Leg (E) using M6x11mm Screws (S-A) and 5mm
Allen Wrench (T-B).
A
D
B
E
S-A
T-B
F
D
E
S-A
T-B

4
STEP 3
STEP 4
Assemble Feet (G) to Leg (D) and Motorized Leg (E) using M6x11mm Screws (S-A) and 5mm Allen
Wrench (T-B).
GS-A
E
D
T-B
Insert Center Crossbar (C) into Le Crossbar (A) and Right Crossbar (B). Secure Center Crossbar (C)
using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
C
A
B
S-A
T-B

5
Loosen the knob on Sync Rod (H) and extend the hex sha. Insert the hex sha into Leg (D), making
sure the metal retaining ring makes contact with Leg (D). While holding the hex sha with one hand,
extend Sync Rod (H) onto the spline sha of Motorized Leg (E). Tighten Sync Rod (H) using 2mm Allen
Wrench (T-A). and retighten the knob.
K
1
2
3
4
STEP 5
STEP 6
Apply Anti-Vibration Pads (K) to Side Brackets (F), Le Crossbar (A) and right Crossbar (B).
H
D
E
T-A
F
K
A
B

6
STEP 7
Secure the frame assembly and Control Panel (I) to the desktop using M5x16mm Screws (S-B) and a
Phillips screwdriver.
S-B
S-B I

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
STEP 8
Plug the cable from Motorized Leg (E) and AC Adapter (J) into Controller (I). Organize cables using
Cable Clips (L). Plug AC Adapter (J) into an AC wall outlet. Please refer to the Controller User Guide for
operating instructions.
E
J
I
L

LAST UPDATED: 08/22/2022
REV1V
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303