Vivo DESK-M43TB User manual

Black 43” x 24” Manual Height Adjustable Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-m43tb
SKU: DESK-M43TB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x2)
Liing
Column
B (x2)
Side Bracket
D (x1)
Upper Crossbar
E (x1)
Lower Crossbar
S-D (x4)
M6x30
S-F (x6)
D6 Washer
C (x1)
Sync Rod
S-E (x8)
Silicone Pad
Drill
F (x1)
Desktop
S-A (x4)
M6x12
G (x1)
Crank
S-G (x1)
Allen Wrench
S-B (x6)
M6x35
S-C (x4)
M5x60
88lbs
(40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Tape Measure
Tape
Measure

3
ASSEMBLY STEPS
STEP 1
Attach side Brackets (B) to Liing Columns (A) using M6x30 Bolts (S-D). Stand up the liing columns
(A) and insert the sync rod (C) into the socket on each column. Use the crank (G) to align columns
if needed. Assemble the side brackets (B) to the columns using M6x30 bolts (S-D), making sure the
long end is facing towards the front, and tighten with the Allen wrench (S-G).
B

4
STEP 2
Assemble the upper crossbar (D) to the top of the columns using the M5x60 bolts (S-C) and the lower
crossbar (E) to the back using M6x12 bolts (S-A). Tighten all bolts using the Allen wrench (S-G).

5
STEP 3
Apply the silicone pads (S-E) to the top of the assembled frame as shown.

6
STEP 4
Place the desktop (F) on top of the frame. Secure using the M6x35 bolts (S-B) with D6 washers (S-E),
and tighten with a Phillips screwdriver.

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
STEP 5
Insert the crank (G) into the hex socket of the liing column.
Figure 1: Turn the crank to raise or lower the desk.
Figure 2: Store the crank in the rear of the side bracket (B) as shown.
Figure 3: Turn the foot pads to adjust the desk level.
Figure 4: Use a bubble level to ensure the desk is sitting perfectly level.

LAST UPDATED: 01/09/2021
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303