Vivo DESK-V122EB User manual

Electric Dual Motor Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v122eb
SKU: DESK-V122EB/EW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
220lbs
(100kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
TOOLS NEEDED
PACKAGE CONTENTS
A (x1)
Le Crossbar
B x1)
Right Crossbar
C(x2)
Foot
D(x2)
Leg
E (x2)
Side Bracket
F (x1)
Crossbar
I(x1)
AC Adapter
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
J (x2)
Cable Clip
Phillips
Screwdriver Drill
NOTE: x2 extras of each screw size have been included.
G (x12)
Rubber Pad
H(x1)
Control
Panel
S-A (x22)
M6x11mm
Screw
T-A (x1)
5mm Allen
Wrench
S-B (x4)
M3.5x19mm
Screw
S-C (x12)
M5x16mm
Screw
ASSEMBLY STEPS
Attach Le Crossbar (A) and Right Crossbar (B) to Legs (D) using M6x11mm Screws (S-A) and 5mm
Allen Wrench (T-A).
Turn leg assemblies upside down and connect Feet (C) to Legs (D) using M6x11mm Screws (S-A) and
5mm Allen Wrench (T-A).
STEP 1
A
D
B
S-A
T-A
C
S-A
T-A
D

4 5
STEP 2 STEP 4
STEP 5STEP 3
Install Side Brackets (E) to Legs (D) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-A).
Insert Crossbar (F) into Le Crossbar (A) and Right Crossbar (B). Adjust the desk frame assembly to
the desired length and then insert M6x11 Screws (S-A) into Le Crossbar (A) and Right Crossbar (B).
Tighten using 5mm Allen Wrench (T-A).
D
E
S-A
T-A
T-A
S-A
B
F
Insert Rubber Pads (G) into desktop mounting holes in Le Crossbar (A), Right Crossbar (B), and Side
Brackets (E).
EB
A
Place the assembled frame upside down on the desktop. Adjust width as needed. If not using a VIVO
desktop with pre-drilled holes, drill 10mm deep pilot holes using a 1/8” (3mm) drill bit. Secure the
frame to the tabletop using M5x16mm Screws (S-C). Tighten with a Phillips screwdriver.
Place Control Panel (H) at the desired location, making sure the cables from Legs (D) are able to reach
the Control Panel (H). If not using a VIVO desktop with pre-drilled holes, mark drilling locations, and
drill 10mm deep pilot holes using a 1/8” (3mm) drill bit. Mount Control Panel (H) using M3.5x19mm
Screws (S-B). Tighten all screws with a Phillips screwdriver.
S-B
H
D
S-C
G
A

6 7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
STEP 6
Connect AC Adapter (I) and cables from Legs (D) to Control Panel (H), as shown below. Turn the
desk right side up and plug AC Adapter (I) into an AC power outlet. Manage cables using Cable
Clips (J). Refer to Controller User Guide for operational instructions.
J
H
D
I
D

LAST UPDATED: 10/20/2022
REV3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303