Vivo DESK-V001KE User manual

31.5”x 15.7” Electric Desk Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v001ke
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-V001KE

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
44 lbs
(19.96kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
A (x1)
Adjustable
Desktop
B(x1)
Keyboard
Tray
C(x2)
Cable Clip
D (x6)
Screw
E (x2)
Cable Tie
F (x3)
So Pad
G (x1)
Screwdriver
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
4.4lbs
(2kg)
DESKTOP TRAY

3
ASSEMBLY STEPS
STEP 1
Carefully remove desk (A) from packaging and cut cable tie from underneath.
STEP 2
Plug the power cord into a wall outlet and hold the UP button to fully raise the desk.
A
1
2

4
STEP 3
If using a grommet mounted monitor desk stand, remove the plastic cap from the desktop and secure
the stand to the hole.
STEP 4
Mount keyboard tray (B) to desk using screws (D). Tighten with screwdriver (G).
B
D
G
1
2
3

5
STEP 5
Apply adhesive cable clips (C) to underside of desk to further organize cables.
Place keyboard, mouse and other items on the desk. Use clips on desk to organize cables.
Use cable ties (E) to further organize cables.
STEP 6
STEP 7
E
C

6
STEP 8
Use the UP and DOWN buttons to operate the desk.
STEP 9
156-485m m
If the keyboard tray doesn't sit flat on the
tabletop when completely lowered, apply
additional pads (F) on the keyboard tray's
pre-installed pads.

7
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.

Last Updated: 05/06/2019
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654