Vivo DESK-KIT-2EW6E User manual

Black Electric Single Motor Desk Frame
Scan the QR code with your mobile device or follow the link

Instruction Manual
https://vivo-us.com/products/desk-v102e
SKU: DESK-V102E
  309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,




WARNING!
PACKAGE CONTENTS
A (x1)
Telescopic

B x1)
Sync Rod
C(x1)

Tray
D(x2)
Foot
E(x2)
Side Bracket
F(x1)

G (x2)
Hook
H x1)
Motorized Leg
I(x1)
Leg
J(x1)

K(x1)

ELECTRICAL SAFETY INSTRUCTIONS


• 
• 
• 

• 

• 
• 
WARNING: CHOKING HAZARD

S-A (x16)
M6x12mm
Bolt
S-B x10)
7/8” Screw
S-C (x2)
3/4” Screw
S-D (x4)
M4x6mm
Screw
S-E (x3)

S-F (x8)
Rubber Pad
S-G x1)

S-H x3)


3
176lbs
(79.8 kg)
DO NOT EXCEED WEIGHT CAPACITY.

ASSEMBLY STEPS
STEP 1
Loosen the two set screws on the telescopic crossbar (AS-G
NOTE: Make sure adjusted length of the


Phillips
Screwdriver
STEP 2
Attach the telescopic crossbar to the legs (H, I) as shown using M6x12mm bolts (S-A), and tighten with
S-G
Drill
NOTE: Insert all necessary screws into holes


4
STEP 3
STEP 4
STEP 5
Place frame upside down on desktop and drill


Place the feet (D
tighten bolts (S-A(S-G)
Attach the side brackets (E) to both ends of the frame using four M6x12mm bolts (S-A


5
STEP 6
STEP 7
Attach hooks (G) to cable management tray (C) using M4x6mm screws
(S-D

 (B)
(I)

CAUTION: To avoid injury, at least two people should

OPTIONAL:(S-H)
and stick them to the inside and top of hooks (G)
S-H
G

6
STEP 8
STEP 9
STEP 10
F) and motorized leg to the controller (KJ) to the

S-F


If you are not using a VIVO desktop, place the desktop on the frame, and secure the desktop using the
(S-B)

7
STEP 11
STEP 12
Attach the controller to the underside of the desktop using 3/4"screws (S-C
is installed, cable clips (S-E


CAUTION!

Do not exceed desk

Keep area of vertical
motion free of

Keep weight on desk
balanced for correct
operation and longer

Leave enough slack in
cables to allow for full


LAST UPDATED: 09/17/2021
REV5.3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: 
[email protected] (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
(within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
 (within oice hrs): 5M 4S
309-278-5303