Vivo STAND-TV07W-S User manual

Black Mobile TV Cart with Storage Shelf
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv07w-s
SKU: STAND-TV07W-S
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x2)
Feet
C(x1)
Center Pole
N x5)
M6x60mm
Carriage Bolt
O(x5)
D6 Washer
P (x5)
M6 Lock Nut
L (x8)
M5x10mm
Bolt
E (x2)
Caster
F (x2)
Locking
Caster
I (x1)
Plastic Cover
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
R (x4)
M6x12mm
Bolt
Q(x1)
M6 Flange
Nut
M-F (x4)
D8 Washer
M-G (x8)
Spacer
M-E (x4)
D5 Washer
M-A (x4)
M4x14
M-B (x4)
M5x14
M-D (x4)
M8x20
M-C (x4)
M6x14
D (x1)
VESA Plate
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
Sx2)
M6x60 Socket
Head Bolt
T x1)
4mm Allen
Wrench
V x1)
Wrench
U x1)
5mm Allen
Wrench
J(x1)
Shelf
K(x1)
Shelf
Bracket
G (x2)
VESA
Adapter
H (x2)
VESA
Adapter
M (x8)
M5 Lock Nut

3
ASSEMBLY STEPS
STEP 1
Attach base (A) to feet (B) using x4 M6x65mm carriage bolts (N), x4 D6 washers (O), and x4 M6 lock
nuts (P). Tighten using the provided wrench (V). Screw casters (E, F) into the base.
NOTE: You will need an adjustable wrench or a 17mm (11/16”) wrench to tighten the casters. Wrench
included will not work.
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
SHELF
44lbs
(20kg)
STEP 2
Remove the two bolts, four washers, and two nuts from the center pole (C) using the 4mm Allen
wrench (T) and the wrench (V). Separate the two halves.
TV
N
O
P
V
T-A
V
C
Wrench
T

4
STEP 3
Slide the plastic cover (I) over the pole (C). Slide the top half of the pole back into the bottom half and
secure using the hardware removed in step 2.
STEP 4
Attach the center pole (C) to the base (A) using x4 M6x12mm bolts (R) and 4mm Allen wrench (T) to
secure the top. Then insert x1 M6x65mm carriage bolt (N) through the front of the base, D6 washer (O)
and M6 lock nut (P). Tighten using the wrench (V).
I
STEP 5
OPTION A: VESA Plate Only
Use (M-A or M-B) bolts along with (M-E) washers to attach the VESA plate (D) without the
adapters to the TV monitor. Make sure the “VIVO” logo on the front is right side up.
N
O
P
R
V
A
C
D
V
T

5
STEP 5 (Continued)
OPTION B: VESA Plate with Adapters
For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA adapters (G, H)
are required. Attach adapters to VESA plate (D) using x8 M5x10mm bolts (L) and x8 M5 lock
nuts (M). Tighten using the wrench (V) and a Phillips screwdriver.
Use bolts (M-A-M-D) along with washers (M-E, M-F) to secure VESA plate with the adapters
to the back of your television. Make sure the “VIVO” logo on the front is right side up. For a
curved television, spacers (M-G) may be required.

6
STEP 6
STEP 7
To attach the TV to the stand, loosen the nut at the top of the VESA plate and slide into the
slot on the top of the mounting plate on the pole. Install M6 flange nut (Q) to the lower screw
post, and secure the top and bottom of the VESA plate to the stand by tightening both nuts
using the wrench (V).
Remove clear protective film from the shelf clamp plate (J). Partially insert M6x60 socket head bolts (S)
into the shelf using the 5mm Allen wrench (U) as shown.
NOTE: Do not fully tighten screws at this time.
Q
V
J
S
U

7
STEP 8
Remove clear protective film from the shelf bracket (K). Hold the shelf (J) to the pole (C). Place the
mounting bracket (K) over the screw heads, then tighten with the 5mm Allen wrench (U).
Adjust as Desired
U
K

LAST UPDATED: 07/19/2021
REV2.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303