Vivo DESK-KN02D User manual

Black / Dark Wood Kids Kneeling Chair and Desk
Instruction Manual
SKU: DESK-KN02D
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-kn02d
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury. 110lbs
(50kg)
A (x1)
Upper Frame
B(x1)
Adjustable Support
C(x1)
Lower Frame
D (x2)
Knee Pad
E(x1)
Seat Pad
F (x1)
Desk Support
G (x1)
Desktop
S-A (x1)
Short Sleeve
Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
S-B (x1)
Long Sleeve
Nut
S-C (x1)
Medium Sleeve
Nut
S-D (x10)
M6x12
Screw
S-E (x6)
M6 Washer
S-F (x2)
M8x35
Screw
S-G (x2)
M8 Washer
S-H (x11)
M6x16
Screw
S-I (x8)
M5x14
Screw
T-A (x2)
5mm Allen
Wrench
H (x2)
Desktop Tilt
Bracket

3
ASSEMBLY STEPS
STEP 1
Assemble the Adjustable Support (B) to top of mounting hole of Upper Frame (A) using
Medium Sleeve Nut (S-C) and M6x12 Screws (S-D) with M6 Washers (S-E). Tighten using
5mm Allen Wrench (T-A).
STEP 2
Mount the other side of the Adjustable Support (B) to the lower mounting hole of Upper
Frame (A) using Short Sleeve Nut (S-A) and M6x12 Screws (S-D) with M6 Washers (S-E).
Tighten using 5mm Allen Wrenches (T-A).
A
S-D
S-E
S-A
B
S-D S-E
S-C
A
B
A
B
S-DS-E
S-A

4
STEP 3
Assemble Lower Frame (C) into Upper Frame (A) using Long Sleeve Nut (S-B) and M6x12
Screws (S-D) with M6 Washers (S-E) in the rear mounting holes of Upper Frame (A). Insert
M8x35 Screws (S-F) with M8 Washers (S-G) into front mounting holes of Upper Frame (A).
Tighten using 5mm Allen Wrenches (T-A).
STEP 4
Attach Knee Pads (D) and Seat Pad (E) to Upper Frame (A) using M6x16 Screws (S-H) and
tighten using Philips end of 5mm Allen Wrench (T-A).
S-DS-E
S-B
S-G
S-F
A
E
C
S-F
S-G
A
S-F
S-G
S-D
S-E
S-B
C
A
E
D
S-H

5
STEP 5
Slide Desktop Tilt Brackets (H) onto either end of Desk Support (F) and mount assembly
to Desktop (G) using M5x14 Screws (S-I) and Philips end of 5mm Allen Wrench (T-A).

6
STEP 6
Mount Desk Support (F) to Lower Frame (C) using M6x12 Screws (S-D) and tighten using
5mm Allen Wrenches (T-A).
S-D
F
C

7
STEP 7
Loosen the knob located on the side of Desk Support (F) to adjust the height of Desktop
(G) and loosen the knob located underneath Desk Support (F) to adjust the tilt. Set to
desired position and retighten knobs.
±30°

LAST UPDATED: 09/08/2021
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303