Vivo DESK-V111B User manual

Black 32" Electric Compact Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v111b
SKU: DESK-V111B
[email protected]om www.vivo-us.com 309-278-5303

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x1)
Base
B(x1)
Motorized
Column
C(x1)
Desktop
I (x1)
Right Bracket
J x1)
Le Bracket
K(x1)
Cover
L(x1)
Power Cable
H(x1)
Control Panel
D (x)
Support Bar
E (x1)
Keyboard
Shelf
F (x1)
Adapter
G (x4)
Foot
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
M(x6)
M6x12 Flange
Bolt
N(x4)
M6x16
Flange Bolt
O(x14)
M6x12 Bolt
P(x4)
5/8" Screw
Q(x1)
5mm Allen
Wrench

3
TOOLS NEEDED
88 lbs
(40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Insert motorized column (B) into underside of support bar (D) as shown, making sure the motor cable
is placed through the slot in front. Secure the liing column using M6x12 flange bolts (M) and tighten
with the Allen wrench (Q).
Phillips
Screwdriver
STEP 2
Assemble the base (A) to the underside of the liing column
using M6x16 flange bolts (N) and tighten with the Allen
wrench (Q). Screw the feet (G) into the base.
M
B
DQ
A
N
G
Level

4
STEP 3
Secure right and le brackets (I, J) to underside of desktop using M6x12 bolts (O), and tighten with a
Phillips screwdriver. The brackets should face away from the center of the desk when assembled.
STEP 4
Place the desktop (C) upside down on a flat surface and position the column/base assembly upside
down on the desktop. Secure the assembly using M6x12 bolts (O), and tighten with a Phillips
screwdriver.
C
O
O
IJ

5
STEP 5
Place the adapter (F) into the support bar as shown.
STEP 6
Attach the control panel (H) to the le-front or right-front of the desktop using 5/8” screws (P).
Connect motor and adapter cables to the control panel, and plug power cable (L) into the adapter.
P
H
L
F

6
STEP 7
Attach cover (K) to keyboard tray as shown using 5/8” screws (P), making sure the cover faces up and
hides the adapter.
STEP 8
Mount keyboard shelf (E) to brackets using M6x12 bolts (O), and tighten with a Phillips screwdriver.
O
E
K
P

7
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 9
Plug the power cable (L) into the wall. If needed, adjust feet to change level of desk.

LAST UPDATED: 09/16/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M