Vivo DESK-TOP4N User manual

Scan the QR code with your mobile device or follow the link for
helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-top4n
SKU: DESK-TOP4N
[email protected]om www.vivo-us.com
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Vintage Brown 51" x 25" Extra Thick Table Top
Instruction Manual

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1
WARNING!
A (x1)
Desktop
Mount Desktop (A) to the desk frame using desk frame screws. If necessary, drill pilot holes
for the screws to match your desk frame. If using a VIVO desk frame, make sure to orientate
the desktop so the control panel blocks are facing the front, and the single clamp block is
facing back.
Please note that mounting screws are not included with this desktop. Use the mounting
hardware included with your standing desk frame to mount the desktop.
Phillips
Screwdriver
TOOLS NEEDED
Drill
This desktop is pre-drilled to
match the mounting holes in
most VIVO electric desk frames
with two legs. Some frames will
not fit these holes. In this case,
you will need to drill your own
to match your frame.
A
Front
Back

3
STEP 3
If installed to an electric height adjustable desk frame, the desk may now be plugged into a power
outlet.
STEP 4
Use a bubble level to make sure the desktop is level. If necessary, adjust the foot pads on the standing
desk frame to level the desktop.
bubble level
STEP 2
For VIVO frames, pre-drilled holes have been included for most control panels.
Note that holes for some control panels and cranks are not pre-drilled. In this case, you must drill your own.
Bottom Side
Pre-drilled holes for panels

LAST UPDATED: 11/15/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303