Vivo DESK-TOP83CB User manual

83” x 83” Curved Corner
Table Top
Instruction Manual
SKU: DESK-TOP83CB
Assembly Video & Product Info
www.vivo-us.com/products/desk-top2cb

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact
our product support team at 309-278-5303 or [e-mail] for further assistance. Check carefully to make sure
there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this
product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
LBS
CAUTION!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
We’re Here for You
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S

3
Phillips
Screwdriver
Package Contents
Included Hardware & Tools
Tools Needed:
D (x1)
Right Panel
A (x1)
Le Panel
B (x1)
Le Middle
Panel
C (x1)
Right Middle
Panel
E (x6)
Support Bar
S-A (x10)
Wooden Dowel Pin
S-B (x24)
ST4.2x20mm Screw

4
ASSEMBLY STEPS
STEP 1
A
BC
S-A
D
S-A (x10)
Place Desktop Panels (A, B, C, D) upside down on a protective surface and insert Wooden Dowel
Pins (S-A) into Right Middle Panel (C) and connect Right Panel (D).
Connect Le Panel (A) and Le Middle Panel (B) to Right Middle Panel (C) and Right Panel (D)
using Wooden Dowel Pins (F).

5
STEP 2
Attach Support Bars (E) to desktop assembly using ST4.2x20mm Screws (S-B) and a
Phillips screwdriver.
S-B (x24)
S-B
E

6
STEP 3
Place your desk frame (not included) upside down on the desktop assembly. Adjust frame
width to match desktop mounting holes, and secure frame to desktop assembly using
hardware provided in your desk frame kit.
Mount the control panel to mounting holes on le or right side of the desktop assembly
using screws included with the desk frame. For VIVO frames, pre-drilled holes have been
included for most control panels.

7
[ THIS PAGE INTENTIONALLY LEFT BLANK ]

LAST UPDATED: 1/11/24
REV1
v1.0
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
Monday-Friday from 7:00am-7:00pm CST
Need Help? Get In Touch
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
VIVO-us @vivo_us