Vivo DESK-E1L94B User manual

Black Corner Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e1l94b
SKU: DESK-E1L94B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
WARNING!
PACKAGE CONTENTS
A (x33)
M5x16 Screw
B x6)
M6x12 Screw
C(x10)
M8x16 Screw
D(x10)
M6x35 Screw
E(x6)
M4x15 Screw
G (x4)
Foot Pad
H x12)
Anti-Vibration
Pad
I(x2)
Cable Clip
1(x3)
Desktop
2(x1)
Le Support
Bar
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
3 (x1)
Right Support
Bar
4 x1)
Leg
5(x1)
Leg with Motor
6(x1)
Sync Rod
7(x2)
Feet
8 (x1)
Cable Tray
9 (x4)
Connector
10 (x1)
Support Bar
Connector
11 (x1)
Control
Panel
12 (x1)
AC Adapter NOTE: Extras of each screw size have been included
F(x1)
Allen Wrench Set
2mm, 5mm

3
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
TOOLS
NEEDED
Phillips
Screwdriver
Place the desktop sections (1) upside down on a flat surface, then assemble using the connectors (9)
with M5x16 screws (A) and a Phillips screwdriver.
1
A
9
Drill
1
10
2
311
6
48
9
5
13
7
7
1
12
1
11
12

4
STEP 2
STEP 3
Assemble the le and right support bars (2, 3) using the support bar connector (10) and M6x12
bolts (B). Tighten with the 5mm Allen wrench (F).
Insert the anti-vibration pads (H) into the desktop mounting holes in the support bar assembly.
B
F
3
2
2
H

5
STEP 4
STEP 5
Place the support bar assembly upside down on the desktop. Align the support bar assembly
with the four pre-drilled alignment holes circled below. Secure these using M5x16 screws
(A) with a Phillips screwdriver. Then secure the rest of the mounting points using the same
screws. The use of a drill is recommended but not necessary.
Assemble the legs (4, 5) to the support bar assembly using M8x16 bolts (C) and tighten with the 5mm
Allen wrench (F).
C
F
5
4
A

6
STEP 6
STEP 7
Place the feet (7) on the legs as shown, then insert and tighten M6x35 bolts (D) using the 5mm Allen
wrench (F). Screw the foot pads (G) into the feet. Insert the sync rod (6) into the leg (4). Loosen the nut
on the sync rod, then extend the rod onto the motor leg (5) and tighten the nut. Tighten the set screw
on the end of the sync rod using the 2mm Allen wrench (F).
Mount the cable tray (8) and hanger (11) to the desktop (1) using M5x16 screws (A) and a Phillips
screwdriver. Mount the control panel (11) using M4x15 screws (E) and a Phillips screwdriver.
Connect the AC adapter (12) and motor to the control panel, then organize cables using the cable
clips (I).
DG
F
F
5
4
8
A
I
1
12
11
E

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
STEP 8
Carefully turn the desk right side up and connect the AC adapter (12) to a wall outlet. If necessary,
adjust foot pads (G) to level the desk.
The desk is now ready for use. Please refer to the Controller User Guide for operating instructions.
11
G

LAST UPDATED: 02/02/2021
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303