Vivo DESK-V110EW User manual

White Electric Single Motor Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v110ew
SKU: DESK-V110EW
[email protected]om www.vivo-us.com 309-278-5303

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
WARNING!
1 (x1)
Control Panel
2(x2)
Side
Bracket
3(x1)
Extension
Cord
A (x24)
M6x12
B x12)
M5x16
C(x1)
Allen Key
8(x1)
Control Unit
4 (x2)
Frame
5 (x2)
Leg
6 (x2)
Foot
7 (x4)
Foot Pad
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
9(x1)
Sync Rod
10 (x2)
Crossbar
11 (x1)
Power Cord
12 (x1)
Desktop
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
TOOLS NEEDED
180 lbs
(81.65kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Place the frames (4) upside down and align pre-installed screws on the legs (5) with the slots. Set the
legs into the frames and tighten screws with the 4mm Allen wrench (C). Screw foot pads (7) into the
feet (6), then attach the feet to the legs using x8 M6x12 screws (A) and tighten with the Allen key. NOTE:
Insert all necessary screws into holes before completely tightening.
Phillips
Screwdriver
STEP 2
Turn assembled legs with frames right side up, then slide the crossbars (10) into the frames. Attach the
side brackets (2) to the frames using x8 M6x12 screws (A) and tighten with the Allen key (C).
M6×12 (x8)
A
S=4mm
S=4mm
S=4mm
M6×12 (x8)
A

4
STEP 3
STEP 4
Loosen the nut on the socket end of the sync rod (9), slide the rod onto the protruding sha of the
motorized leg, then tighten the nut. Loosen the nut on the sha end of the sync rod (9), slide the sha
into the socket of the non-motorized leg, then tighten the nut.
Adjust the width of the frame to fit your desktop. Tighten x8 M6x12 screws (A) into the underside of the
frames (4) to secure the adjusted length.
A
Nut
Nut

5
STEP 5
Attach your desktop (12) to the assembled desk frame using x8 M5x16 screws (B). Mount the control
panel (1) and control unit (8) to the underside of the desktop using x4 M5x16 screws (B). Use the
extension cord (3) to connect the motor to the control unit (8), then connect the control panel and
power cord (11).
B

6
Step 6
Plug the power cable (11) into an AC wall outlet, then use the control panel (1) to adjust the height.

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.

LAST UPDATED: 09/16/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M