Vivo DESK-V201G-CH User manual

Gray Kids’ Height Adjustable Ergonomic Chair
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v201g-ch
SKU: DESK-V201G-CH
[email protected]om www.vivo-us.com 309-278-5303

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING!
PACKAGE CONTENTS
B1 (x1)
Chair Leg
B2 (x2)
Chair Feet
B4 (x1)
Side Support Bar
B5 (x1)
Center Support
Bar
B6 (x1)
Seat Bottom
B3 (x1)
Support Bar
B7 (x1)
Seat Back
A1 (x4)
Metal Washer
A3 (x4)
Plastic Washer
A4 (x4)
Long Thread
Screw
A5 (x2)
Knob
A2 (x8)
Medium Screw
A6 (x1)
Allen Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF DESK OR CHAIR
• USE TIPOVER RESTRAINT OR ANCHOR DESK TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

3
ASSEMBLY STEPS
STEP 1
Attach chair legs (B1) to chair feet (B2), making sure legs are fully seated in openings.
TOOLS NEEDED
Phillips
Screwdriver
220 lbs
(100 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
B1
B2x2
DO NOT place hands on or near support bars. Moving
parts can crush and cut. Pinch points are created during
liing and lowering the worksurface. Failure to follow
these instructions may result in serious personal injury.
WARNING!
!
PINCH POINT

4
STEP 2
Assemble right side support bar (B3) to leg using 2 medium screws (A2) and 2 plastic washers
(A3). The support bar has a large hole on the le side which will face inward. Tighten with
allen wrench.
STEP 3
Secure feet using 4 medium screws (A2) and 4 metal lock washers (A1). Tighten with allen
wrench (A6).
A1x4 A2x4 A6
A2x2
A3x2
B3

5
STEP 4
STEP 5
Slide center support bar (B5) into large hole on right side bar. Slide le side support bar
(B4) onto center bar, and secure to legs with 2 medium screws (A2) and 2 plastic washers
(A3). Tighten with allen wrench.
Mount plastic seat bottom (B6) to assembled chair frame using 4 long plastic thread screws
(A4). Tighten with phillips screwdriver.
A2x2
A3x2
B4
B5
A4x4
B6

6
STEP 6
STEP 7
Slide plastic seat back (B7) onto chair frame, aligning
upper or lower holes in seat back with screw holes in frame
depending on the needed height.
Secure seat back using knobs (A5).
B7
A
B
or
A5x2

7
Adjust chair feet to sit level if needed.
STEP 8
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not lean
backwards on the
chair.
Raise sides evenly,
ensuring that the legs
are locked before
sitting.

LAST UPDATED: 09/16/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M