Vivo MOUNT-KB01CB User manual

Single Clamp Rotating Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb01cb
SKU: MOUNT-KB01CB/CW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
STEP 1
Remove backing from Non-Slip Pad (G) and apply to underside of Upper Clamp (C).
Connect Upper Clamp (C) to Lower Clamp (D) using M8x12mm Screws (S-A) and
5mm Allen Wrench (T-A), using the appropriate assembly option for your desktop thickness.
0-65mm Desktop Thickness:
Use top two holes on
Upper Clamp.
25mm-90mm Desktop
Thickness:
Use lower two holes on
Upper Clamp.
PACKAGE CONTENTS
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
A (x1)
Tray Set
G (x1)
Non-Slip Pad
B(x1)
Tray Support
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please contact our product support team at 309-278-5303 or [email protected] for further assistance.
Check carefully to make sure there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C(x1)
Upper Clamp
D(x1)
Lower Clamp
S-A (x4)
M8x12mm Screw
S-B (x10)
M5x12mm Screw
T-A (x1)
5mm Allen Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
E(x2)
Plastic Bushing
F(x1)
Swivel Cap
G
C
S-A
T-A
D

4 5
STEP 4
Place the tray assembly onto the desktop. Insert 5mm Allen Wrench (T-A) into underside of Lower
Clamp (D) and tighten to secure to desktop.
T-A
D
STEP 3
Place Tray Set (A) side by side and note the two sets of pilot holes. Indentify which set is closer to the
combined edge, which will be the backside of the tray. Connect Tray Set (A) to Tray Support (B) from
the backside using M5x12mm Screws (S-B) and a Phillips screwdriver.
S-B
B
A
STEP 2
Insert Plastic Bushings (E) into Tray Support (B). Secure Tray Support (B) to Lower Clamp (D) using
Swivel Cap (F).
B
E
E
D
F
Back
Front
Desktop

6 7
STEP 5
Place keyboard and mouse on Tray Set (A) and adjust as desired.
[ THIS PAGE INTENTIONALL LEFT BLANK ]
Desktop
360°

LAST UPDATED: 08/02/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303