Vivo DESK-VE36K User manual

Black Electric Desk Riser
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
https://vivo-us.com/products/desk-ve36k
SKU: DESK-VE36K
[email protected] www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualied
technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is not explicitly specied in this manual and do not exceed weight
capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
44lbs
(20kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Separate the sleeve nut with screw (C) into (C1)
and (C2).
STEP 2
Apply Pads (E) to underside of Keyboard Tray
(B). Press Sleeve Nut (C1) into holes on top of
Keyboard Tray (B).
WARNING!
A (x1)
Desk
B (x1)
Keyboard
Tray
C (x4)
Sleeve Nut
with Screw
D (x2)
Cable Clip
E (x3)
Pad
F (x4)
Rubber Feet
TOOLS NEEDED
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
STEP 3
Install Feet (F) to the bottom of Desk (A). Then cut the large plastic safety tie. Plug Desk (A) into a wall
outlet, and press the up arrow on the control panel to fully raise the desktop.
DESKTOP
4.4lbs
(2kg)
KEYBOARD TRAY
Bottom
Top
F
A
E
B
C1

3
STEP 6
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
If installing a monitor mount, remove the plug from
the desktop, then secure the mount using grommet
mounting hardware included with your monitor mount.
STEP 4
STEP 5
Apply cable clips (D) to underside of desk.
Place Keyboard Tray (B) on metal brackets on Desk (A). While holding Sleeve Nuts (C1), secure
Keyboard Tray (B) to brackets using Screws (C2) and tighten with a Phillips screwdriver.
C2
C1
BA

LAST UPDATED: 08/23/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us.We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oce hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oce hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oce hrs): 5M 4S
309-278-5303