Vivo DESK-TOP60R-B User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: DESK-TOP60R-B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black 58” x 35” Reversible Corner Table Top
https://vivo-us.com/products/desk-top60r-b

2
WARNING!
ASSEMBLY STEPS
STEP 1
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
B (x1)
Straight Panel
A (x1)
Corner Panel
C (x2)
Support Bar
S-B (x8)
ST4.2x20mm
Screw
S-A (x3)
Wooden
Dowel Pin
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
Place Desktop Panels (A, B) upside down on a protective surface. Connect Corner Panel (A) and
Straight Panel (B) using Wooden Dowel Pins (S-A). The final orientation will be flipped since the
desktop is being assembled upside down.
TOOLS NEEDED
T-A (x1)
Pilot Hole
Tool
T-B (x3)
Nail
A
B
S-A
Corner panel will
be on right side
aer assembly
Corner panel will
be on le side
aer assembly
Phillips
Screwdriver Drill Hammer

3
STEP 2
Attach Support Bars (C) to Straight Panel (B) using ST4.2x20mm Screws (S-B) and a Phillips
Screwdriver. Mark hole locations on Corner Panel (A) with a pencil.
STEP 4
Reattach Corner Panel (A) to desktop assembly and secure Support Bars (C) using ST4.2x20mm Screws
(S-B) and a Phillips Screwdriver.
STEP 3
Slide Corner Panel (A) out from desktop assembly. Create pilot holes on marked locations with Pilot
Hole Tool (T-A) or drill 1/2” (13mm) deep holes using a 7/64” (2.8mm) bit.
C
S-B
A
S-B
T-A
T-B
A
Pilot Hole Tool Instructions: Insert Nail (T-B) through the top of Pilot Hole Tool (T-A). Align the tip of
the nail on marked holes and hammer the nail until the head reaches the top of the pilot hole tool. Pull
the tool out and repeat with remaining hole locations.
A
C

LAST UPDATED: 10/27/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303