Vivo DESK-V202A User manual

Mobile Kids’ Desk
Instruction Manual
SKU: DESK-V202A
Assembly Video & Product Info
www.vivo-us.com/products/desk-v202a

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please
contact our product support team at 309-278-5303 or [email protected] for further assistance. Check carefully to
make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not
use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
LBS
CAUTION!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
We’re Here for You
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
WARNING: PINCH POINT
DO NOT PLACE HANDS ON OR NEAR SUPPORT BARS. MOVING PARTS CAN CRUSH AND CUT.
PINCH POINTS ARE CREATED DURING LIFTING AND
LOWERING THE WORK SURFACE. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.

3
Package Contents
Included Hardware & Tools
Weight Capacity:
A (x1)
Desktop B (x4)
Connecting
Pipe
C (x2)
Leg
D (x4)
Caster
E (x1)
Pen Holder
S-A (x8)
Knob
T-A (x1)
Wrench
40lbs
18kg

4
ASSEMBLY STEPS
STEP 1
Thread Casters (D) into Legs (C) using Wrench (T-A). Use Brake Levers on Casters to lock rotation.
C
T-A
D
T-A

5
Insert the end of Connecting Pipe (B) with the printed scale marked 80cm to 130cm into
Desktop (A) as shown.
STEP 2
B
A

6
STEP 3
Slide Legs (C) over Connecting Pipes (B). Adjust to desired height and secure using
Knobs (S-A).
C
D
S-A
S-A (x4)

7
STEP 4
Secure Connecting Pipes (B) to Desktop (A) using Knobs (S-A).
B
A
S-A
S-A (x4)

8
STEP 5
Flip assembled desk right side up. Insert Pen Holder (E) into Desktop (A). Raise the
Retention Lip on Desktop (A) by releasing the button underneath. To lower the Retention
Lip, press down until it locks into place.
E
A
Retention
Lip

9
STEP 6
To lower, li the desk surface past 80° to unlock, and lower it to the flush position.
WARNING:
PINCH POINT
DO NOT place hands on or near support
bars. Pinch points are created during liing
and lowering desktop. Failure to follow this
instruction may result in serious injury.
To lower, li the desk surface past 80° to unlock, and lower it to the flush position.

10
STEP 7
STEP 8
Loosen Knobs (S-A) under Desktop (A) to adjust the width of the desk assembly.
Loosen Knobs (S-A) on Legs (C) to adjust the height of the desk assembly.
S-A
S-A
C
A