Vivo MOUNT-KB08S User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb08s
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Black Under Desk Keyboard Tray with Swinging
Height Adjustment
SKU: MOUNT-KB08S

2
PACKAGE CONTENTS
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Keyboard
Tray Set
NOTE: 2 Extra screws have been included of each
TOOLS NEEDED
B(x2)
Connecting Plate
C(x2)
Height Adjustable
Bracket Set
D(x1)
Keyboard
STop
S-A (x18)
M5x12mm Screw
S-B (x8)
M5x14mm Screw

3
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray Set (A) by placing Connecting Plates (B) into the insets on underneathside of
Tray. Secure with M5x12mm Screws (S-A) and a Phillips screwdriver.
STEP 2
Install Keyboard Stop (D) onto assembled Keyboard Tray using M5x12mm Screws (S-A) and a Phillips
screwdriver.
S-A
D
S-A
A
B

4
STEP 3
Secure Height Adjustable Bracket Set (C) to the sides of Keyboard Tray (A) using M5x12mm Screws
(S-A) and a Phillips screwdriver.
S-A
C
A

5
STEP 4
Unfold the Adjustable Brackets (C) by pressing down on the levers and pulling the
top bracket up. Make sure the brackets are adjusted to the same level for installation.
C

6
STEP 5
Hold the keyboard tray assembly against the underside of the desk 0.5” (12mm) from
the edge and mark drilling locations with a pencil. Drill 3/8” (10mm) deep holes using
a 1/8” (3mm) drill bit. Mount keyboard tray assembly using M5x14mm Screws (S-B)
and a Phillips screwdriver.
S-B
Desktop
Desktop

7
THIS PAGE INTENTIONALLY LEFT BLANK

LAST UPDATED: 08/08/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303