Vivo DESK-E-P48KW User manual

White 48" x 24" Mobile Electric Desk with 2 Hooks &
Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e-p48kb
SKU: DESK-E-P48KW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call
a qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation
may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in
this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING!
PACKAGE CONTENTS
S-A (x12)
ST4.2x13mm Screw
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x4)
M8x50mm Screw
S-C (x4)
M8x16mm Screw
S-D (x8)
M6x35mm Screw
NOTE SOME EXTRA HARDWARE INCLUDED MAY NOT BE USED.
S-E (x14)
M6x14mm Screw
S-F (x2)
ST4.2x9.5mm Screw
S-G (x6)
M5x10mm Screw
T-A (x1)
Caster Wrench
T-B (x1)
5mm Allen Wrench
T-C (x1)
Sync Rod Wrench
A (x1)
Leg
B (x1)
Motorized Leg
C(x1)
Front Desktop
D(x1)
Back Desktop
E(x2)
Side Bracket
F (x2)
Foot
G (x1)
Sync Rod
H (x1)
Crossbar
I (x1)
Tray
J (x1)
AC Adapter
K (x1)
Control Panel
L (x1)
Power Cable
M(x3)
Connecting Plate
N(x2)
Hook
O(x6)
Wooden Dowel
P (x1)
Cable Managment
Cover
Q (x5)
Cable Clip
R (x2)
Keyboard Stop
S(x2)
Keyboard
Bracket
T(x1)
Keyboard Tray
U(x4)
Caster

3
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
Phillips
Screwdriver
Drill
Level
STEP 1
ASSEMBLY STEPS
Place Front Desktop (C) and Back Desktop (D) upside down on a clean at surface. Insert Wooden
Dowels (O) into the holes in both desktops and slide them together. Use Connecting Plates (M) with
ST4.2x13mm Screws (S-A) to secure the desktop assembly. Mount Hooks (N) to the desktop assembly
using ST4.2x13mm Screws (S-A).C
O
D
M
S-A
S-A
N

4
Mount Side Brackets (E) to the frame assembly using M8x16mm Screws (S-C) and 5mm Allen Wrench
(T-B).
STEP 2
STEP 3
Assemble Crossbar (H) to Leg (A) and Motorized Leg (B) using M8x50mm Screw (S-B) and 5mm Allen
Wrench (T-B).
A
B
H
T-B
T-B
S-C
E
S-B

5
STEP 4
Place the frame assembly upside down and assemble Feet (F) to Leg (A) and Motorized Leg (B) using
M6x35mm Screws (S-D) and 5mm Allen Wrench (T-B).
STEP 5
If desired, the foot pads on Feet (F) can be reaplced with Casters (U). Unscrew the pads and thread
Casters (U) onto Feet (F) using Wrench (T-A).
U
T-A
F
T-B
S-D
A
B
F

6
STEP 6
Place Tray (I) over Crossbar (H).
STEP 7
7
2.4
2.1
1
2
3
2.2 2.3
Loosen the knobs on Sync
Rod (G) using Wrench (T-C)
and extend the hex sha.
Insert the hex sha into Leg
(A), making sure the metal
retaining ring makes contact
with the leg. While holding the
hex sha with one hand,
extend Sync Rod (G) onto the
spline sha of Motorized Leg
(B). Retighten knob.
I
T-C
H
Retaining Ring
Retaining Ring
A
B
G

7
STEP 8
Secure the frame assembly to the desktop using M6x14mm Screws (S-E) and a Phillips
screwdriver.
STEP 9
Assemble Control Panel (K) to Front Desktop (C) using ST4.2x13mm Screws (S-A) and a
Phillips screwdriver.
S-E
E
S-A
K
C

8
STEP 10
Plug the cable from Motorized Leg (B) into Control Panel (K).
STEP 11
Connect AC Adapter (J) to Control Panel (K).
K
J
K
B

9
STEP 12
Plug Power Cable (L) into AC Adapter (J).
STEP 13
Place AC Adapter (J) in Tray (I).
STEP 14
Assemble Keyboard Stops (R) to Keyboard Tray (T) using ST4.2x9.5mm Screws (S-F) and a
Phillips screwdriver.
S-F
R
L
J
J
I
T

10
STEP 15
Secure Keyboard Brackets (S) to Keyboard Tray (T) using M5x10mm Screws (S-G) and a Phillips
screwdriver.
STEP 16
Assemble Keyboard Brackets (S) to Front Desktop (C) using
M6x14mm Screws (S-E) and a Phillips screwdriver.
STEP 17
Remove adhesive backing from Cable Clips (Q) and apply them to the underside of
the desktop assembly. Manage cables using Cable Clips (Q).
1 2 3
S-G
S
S-E
Q
T
S
C