Vivo DESK-V000KL User manual

38” Corner Desk Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000kl
SKU: DESK-V000KL/LA/LN/LW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors
33 lbs
(15kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
WARNING!
Phillips
Screwdriver
A (x1)
Desk
B(x1)
Keyboard Tray
S-A (x4)
M5x10mm
Screw
S-B (x2)
ST4.2x12mm
Screw
C (x2)
Cable Clip
D (x3)
Foam Pad
E (x4)
Foot Pad
F (x1)
Stopper
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
4.4lbs
(2kg)
Keyboard TrayDesk
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B).
STEP 2
STEP 3
DB
Install Stopper (F) to underside of Keyboard Tray (B) using ST4.2x12mm Screws (S-B) and a Phillips
screwdriver.
S-B
FB
Press Foot Pads (E) into holes in base of Desk (A).
E
A

4 5
STEP 5
STEP 7
STEP 6
STEP 4
Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the
desktop.
A
Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using
M5x10mm Screws (S-A) and a Phillips screwdriver.
B
A
S-A
Apply Cable Clips (C) to underside of desk assembly.
C
A
Cut the large plastic ties on bottom of Desk (A). CAUTION: Do not squeeze the release handle with
the desk in a sideways or upside-down position.

6 7
CAUTION!
Raise desktop slowly
to keep items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 8
Grommet Installation
Place monitor and accessories on desk
assembly to begin using.
If installing a grommet compatible monitor mount, remove the plastic cap from the rear-center of
the desktop. Install the mount to the open hole according to the mount’s directions.

LAST UPDATED: 03/21/2023
REV4.2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303