Vivo DESK-V122EW User manual

White Electric Dual Motor Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v122ew
SKU: DESK-V122EW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
A (x18)
M5x16
B x14)
M6x12
C(x14)
M6x12 Flat Head
D(x4)
M4x15
E(x1)
4mm Allen
Wrench
F(x5)
Cable Clip
G (x4)
Foot Pad
1 x1)
Desktop
(not included)
2(x2)
Outer Crossbar
3(x2)
Inner Crossbar
4(x2)
Side
Bracket
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
5 (x2)
Leg
6 x2)
Feet
7(x1)
Controller
8(x1)
Control Unit
9(x1)
AC Adapter
10 (x1)
Power
Cable
11 (x1)
Extension
Cable
12 (x1)
Adapter Support
Bracket
NOTE: x2 extras of each screw size have been included.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Drill
Attach a side bracket (4) to the short end of each
leg (5) using x2 M6x12 flat head bolts (C) for
each. Tighten with the Allen wrench (E).
STEP 2
Assemble an outer crossbar (2) and inner
crossbar (3) to each leg (5) using x2 M6x12 flat
head bolts (C) for each crossbar, and tighten
with the Allen wrench (E). With both legs upside
down and side brackets (4) facing away, the
outer crossbars will be on the le, and the inner
crossbars on the right.

4
STEP 3
STEP 4
Mount the feet (6) to the legs (5) using x4 M6x12 bolts (B) for each and tighten with the Allen wrench
(E). Screw the foot pads (G) into the feet, then slide the inner crossbars (3) into the outer crossbars (2)
to connect the assemblies.
Place the assembled frame upside down on the tabletop. Adjust width as needed, and drill 10mm
deep pilot holes using a 1/8” (3mm) drill bit. Secure the frame to the tabletop using x10 M5x16 screws
(A). Tighten with a Phillips screwdriver.

5
STEP 5
STEP 6
Tighten x4 M6x12 bolts (B) into the outer crossbars (2)
to secure the frame width.
Place the control unit (8) between the crossbars, making sure the cable from at least one leg (5) is able
to reach and connect. Mark screw locations, drill 10mm deep pilot holes using a 3/32” (2.5mm) drill
bit, and mount the control unit using x2 M4x15 screws (D). Place the AC adapter (9), adapter support
bracket (12) and controller (7) at the desired locations, making sure the cables are able to reach the
control unit, and mark drilling locations. Drill 10mm deep pilot holes using a 1/8” (3mm) drill bit,
and mount the adapter, support and controller using x6 M5x16 screws (A). Tighten all screws with a
Phillips screwdriver.

6
STEP 7
STEP 8
Connect the AC adapter (9), controller (7) and legs (5) to the control unit (8). If needed, use the
extension cable (11) to connect one of the legs. Connect the power cable (10) to the AC adapter.
Turn the desk right side up and plug the power cable (10) into an AC power outlet. Adjust foot pads to
sit level if necessary. Refer to Controller User Guide for operational instructions.

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.

LAST UPDATED: 06/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303