Vivo MOUNT-VP08DP User manual

White Extending Universal Drop Ceiling
Projector Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vp08dp
SKU: MOUNT-VP08DP
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
A (x1)
Mount B(x1)
Bracket
C (x1)
Mount Arms
E(x2)
Clip
S-F (x2)
Plastic
Spacer
S-G (x2)
Threaded
Plate
D (x1)
Ceiling Plate
S-A (x2)
M6x18mm
Screw
S-B (x2)
M6 Washer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
M-A (x4)
M3x8mm
Screw
M-B (x4)
M4x10mm
Screw
M-C (x4)
M5x10mm
Screw
M-D (x4)
M6x10mm
Screw
M-E (x4)
M3 Washer
M-F (x4)
M4 Washer
S-C (x6)
M5x12mm
Screw
S-D (x6)
Small M5
Washer
S-E (x6)
Plastic M5
Washer
T-A (x1)
4mm Allen
Wrench
T-B (x1)
5mm Allen
Wrench
M-G (x4)
M5 Washer
M-H (x4)
M6 Washer
F (x1)
Y-Cable with
Lock
Alternative mounting hardware (if drop ceiling panel is not used)
W-A (x4)
ST6x56mm Screw
W-B (x4)
Concrete Anchor
W-C (x4)
M6 OD-16 Washer

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Drill
Remove plastic plug from Ceiling Plate (D).
29.7 lbs
(13.5 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 2
D
Insert 2 toggles at end of Y-Cable with Lock (F) into 2 of the 16 slots on the top of the Ceiling Plate (D),
making sure the slots chosen will provide optimal support for the mount with projector. Place Ceiling
Plate into suspended-ceiling grid. Thread end of cable through the side hole in the lock in the direction
of the arrow, wrap cable around beam or other support, then insert cable down through center hole in
lock and pull down to secure.
D
F

4
STEP 3
OPTION A: Insert cables through side of Mount (A) if cables will be exposed below ceiling.
Push Clips (E) down over drop ceiling T-bar to hold the Ceiling Plate (D) down.
STEP 4
OPTION B: Insert cables through center of Mount (A) if cables will be hidden above ceiling.
E
D
A
A
T-Bar

5
STEP 5
STEP 6
Secure Mount (A) to Ceiling Plate (D) using M6x18mm Bolts (S-A) with M6 Washers (S-B), and tighten
with 5mm Allen Wrench (T-B).
Secure Bracket (B) to Mount (A) using Threaded Plate (S-G), Plastic Spacer (S-F), M5x12mm Screws
(S-C), Small M5 Washer (S-D), Plastic M5 Washer (S-E), and 4mm Allen Wrench (T-A).
S-D S-E
S-G
S-F
T-A
S-C
T-B
A
A
B
D
S-A
S-B

6
STEP 7
STEP 8
Angle Mount Arms (C) with Projector and hook onto Assembled Mount to partially secure.
Secure Mount Arms (C) to Assembled Mount using M5 Plastic Washer (S-E), M5 Washer (S-D),
M5x12mm Screw (S-C) and 4mm Allen Wrench (T-A).
Align Mount Arms (C) with mounting holes in projector, and mount to projector using screws (M-A
thru M-D), Washers (M-E thru M-H) most appropriate for your projector and a Phillips Screwdriver.
NOTE: If your projector has 3 mounting holes, simply remove one of the arms. For mini projectors with
a single hole, remove all arms and mount projector directly to Bracket.
M-A/M-B/M-C/M-D
M-E/M-F/M-G/M-H
C
S-C
S-D
C
T-A
S-E

7
STEP 9
T-A
Adjust angle and rotation of projector if desired by loosening screws on Assembled Mount using 4mm
Allen Wrench (T-A).

LAST UPDATED: 08/01/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303