Vivo PS-T-050B User manual

50” Portable Tripod Projector Screen 4:3
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/ps-t-050b
SKU: PS-T-050B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: FOLLOW INSTRUCTIONS TO PREVENT PRODUCT DAMAGE AND/OR PERSONAL INJURY:
• DO NOT FOLD SCREEN
• DO NOT USE FINGERS OR HARD OBJECTS TO TOUCH SCREEN SURFACE
• DO NOT SPLASH LIQUIDS OR CHEMICALS ON SCREEN SURFACE
• KEEP SCREEN AWAY FROM HOT OBJECTS OR FIRE
PRODUCT STRUCTURE
Lower
Rod
Screen
Tripod (Type E)
Hanger
Rod
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TRIPOD
• USE TIPOVER RESTRAINT OR ANCHOR TRIPOD TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

3
If screen becomes dirty, wipe gently with a so cloth. Do NOT use solvents to clean screen surface.
DISASSEMBLY
ASSEMBLY STEPS
Loosen blue height adjustment knob. Extend pole, then tighten knob.
STEP 1
Extend tripod feet.
STEP 2
Hang screen over hook on top of tripod.
STEP 3
CLEANING
Open straps on screen and carefully unroll screen.
STEP 4
Remove lower rod from the handle with clip. Roll up screen using lower rod, then wrap
straps around screen to fasten.
STEP 1
Remove screen from tripod.
STEP 2
Loosen blue height adjustment knob, retract pole, then tighten knob.
STEP 3
Collapse tripod feet.
STEP 4
Attach lower rod to the handle with clip. Flip up the blue lever on the handle, pull
down until screen is flat, then engage the lever.
STEP 5

LAST UPDATED: 03/05/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303