Vivo PP-RD-069B User manual

Dark Gray 69" x 70" Cloth Room Divider
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/pp-rd-069b
SKU: PP-RD-069B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x2)
Upper Vertical
Support
TOOLS NEEDED
Phillips
Screwdriver
B (x2)
Lower Vertical
Support
D (x2)
Crossbar With
Extension
S-A (x6)
ST4x40mm Screw
S-C (x4)
M5 Nut
C (x2)
Foot
S-B (x4)
M5x25mm Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
E (x2)
Crossbar
H (x4)
Brace
S-E (x2)
Large Insert
S-D (x4)
Small Insert
G (x6)
End Cap
F (x1)
Divider

3
ASSEMBLY STEPS
STEP 1
Secure Small Inserts (S-D) into one end of Crossbars (E) and Crossbars With Extension (D). Assemble
Large Inserts (S-E) into the bottoms of Lower Vertical Supports (B).
S-D
S-D
S-E
D
E
B

4
STEP 2
Assemble Feet (C) to Lower Vertical Supports (B) using ST4x40mm Screws (S-A) and a Phillips
screwdriver.
B
C
STEP 3
Insert Lower Vertical Supports (B) into the bottom of Upper Vertical Supports (A).
B
A
S-A

5
STEP 4
Assemble Braces (H) to feet (C) using M5x25mm Screws (S-B) and M5 Nuts (S-C). Secure x1 Crossbar (E)
to x1 Lower Vertical Support (B) using ST4x40mm Screw (S-A).
STEP 5
Assemble x1 Crossbar (E) to x1 Vertical Support (A) using ST4x40mm Screw (S-A) and a Phillips
screwdriver.
H
C
S-B
S-C
E
B
S-A
E
A
S-A

6
3
STEP 6
Insert Crossbars with Extensions (D) to assembled Crossbars (E).
STEP 7
Slide Divider (F) onto the crossbar assembly.
D
E
F

7
3
STEP 8
Secure the other upright assembly to the crossbar assembly using ST4x40mm Screws (S-A) and a
Phillips screwdriver.
Assemble End Caps (G) to Upper Vertical Supports (A) and Feet (C).
STEP 9
S-A
G
A
C

LAST UPDATED: 11/01/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303