Vivo MOUNT-AR02 User manual

   

Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
Scan the QR code with your mobile device or
follow the link to helpful videos and
specifications related to this product.
- -! ""##  $%" "% 
 &'()
 *
 &'+)
+'( !%*
*
 &'+)
, - !
(6x17x2mm)
 %*. 
Remove the screw in the
bottom of the base, and
detach the base from the
monitor.
 ( %#   
1

2
If you do not understand these directions, or if you have
any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are
no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual.
We cannot be liable for damage or injury caused by
improper mounting, incorrect assembly, or inappropriate
use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please
contact us. We are happy to replace parts to ensure you
have a fully functional product.
/. 0
  
Last updated: 0 /29/2018
Online Version
Position the base clip on
the adapter bracket (A)
and insert the screw from
step one into the center
hole in the bottom of
bracket. Tighten securely.
If needed, use the
included washers (C) to
enable a more secure fit.
Connect the VESA
plate to the adapter
bracket (A) using
four M4x12 thumb
bolts (B).
  !    
 1  !     
2