Vivo MOUNT KB04C User manual

Adjustabl Undrds
Kyboard Tray
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Modl MOUNT KB04C
Scan the QR code with your mobile device or follow
the link to helpful videos and specifications related to
this product.
Assmbly Stps
Tools Rqu rd
phillips screwdriver, drill, pencil
Pacag Contnts
A (x1) B (x1) C (x1)
D (x4) E (x4) F (x4) G (x4)
Position track (A) 30mm from
the front edge of the desk.
Mark hole locations with a
pencil. Drill 1 mm (0.6")
holes using a 4mm (3/20")
drill bit.
Stp 1
1
https://vivo-us.com/products/mount-kb04c

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safty Warn ng
Contact us at
2
Last Updated: 04/26/2018
Stp 2
Assemble mounting bracket (B) to
track using screws (D).
Mount assembly to underside of
desk using screws (E).
Stp 5
Stp 4
Stp 3
Assemble keyboard tray (C)
to mount using screws (F),
and apply screw covers (G).
Loosen the knob to adjust tilt and height, and tighten in the desired position.