Vivo STAND-TV01T User manual

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv01t
SKU: STAND-TV01T
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
R (x4)
M8x35
J(x4)
M4 Washer
Q (x4)
M8x20
M (x4)
M4x12
N (x4)
M4x30
O (x4)
M6x20
P (x4)
M6x35
A4 (x1)
TV Bracket1
K(x4)
M6 Washer
A3 (x1)
Plastic Cover
A1 (x1)
Base Plate
B1 (x1)
Base Plate
L (x4)
M8 Washer
G (x4)
M4 Spacer
H(x8)
5mm M6/8
Spacer
E(x1)
Allen Wrench
D2 (x8)
M6 Nut
D1 (x4)
M6 Cap Nut
C(x8)
M6x10
B2 (x1)
Junction Plate
A2 (x1)
Junction Plate
B3 (x1)
Plastic Cover
B4 (x1)
TV Bracket1
A5 (x1)
TV Bracket2
B5 (x1)
TV Bracket2
F (x1)
Crescent Wrench
T (x2)
So Pad
S (x4)
M8x45
A6 (x1)
TV Bracket3
B6 (x1)
TV Bracket3
I(x4)
20mm M6/8
Spacer
W (x1)
Concrete
Anchor
U (x1)
M6x45
V (x1)
Washer
X (x1)
Security
Wire

3
TOOLS NEEDED
110lbs
(49.9kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
ASSEMBLY STEPS
STEP 1
Connect base plates (A1, B1) to junction plates (A2, B2) using M6x10 bolts (C) as shown in the
diagram. Use the Allen wrench (E) to tighten bolts. Apply so pads (T) to base plates.
A1 & B1
Soft Pad
A2
B2
A1
B1
C
E

4
STEP 2
Connect the lower TV brackets (A4, B4) to the middle and upper TV brackets (A5, A6, B5, B6) using M6
nuts (D2). Use the crescent wrench (F) to tighten.
NOTE: The middle and/or upper TV brackets may be le unused for smaller TVs that do not require the
additional height.
B4
B5
B6
A4
A5
A6
D2
F

5
STEP 3
STEP 4
Attach assembled brackets to back of TV using bolts (M-S) and washers (J-L) according to mounting
holes in TV. If bolts are too long, spacers (G-I) may be required. If optional security wire (X) will be
used, install to back of brackets with TV at this time.
E
D1
E
C
B3
B2
B4 A4
A2
Attach TV brackets to junction plates using M6x10 bolts (C) and M6 cap nuts (D1). Secure using the
Allen wrench and crescent wrench (E, F). Attach plastic covers (A3, B3) to junction plates by pressing
tabs into holes.
G,H,I
(if necessary)
M to S
J to L

6
STEP 5
OPTION A: Wood Stud Wall
Drill a 1.75” (45mm) deep hole using a 5/32” (3.8mm) drill bit. Attach security
wire (X) to hole using the M6x45 bolt (U) with washer (V) and tighten with a
Phillips screwdriver.
OPTION B: Concrete/Brick Wall
Drill a 2” (50mm) deep hole using a 5/16” (8mm) drill bit, and press concrete
anchor (W) into hole. Attach security wire (X) to hole using the M6x45 bolt (U)
with washer (V) and tighten with a Phillips screwdriver.
45mm
3.8mm
U
VX
U
V
W
X
40mm
45mm
8mm

7
STEP 5 (Continued)
Ensure that security wire (X) has little or no slack between the wall and TV. This will
greatly reduce the risk of tipping.

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303