Vivo MOUNT-KB05P User manual

Black Clamp-on Keyboard Tray with RGB Pad
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05p
SKU: MOUNT-KB05P
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
Assemble Keyboard Tray (A) using Connecting Plates (B) and M5x12mm Flat Head Screws (S-C).
Tighten with a Phillips screwdriver.
PACKAGE CONTENTS
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Keyboard Tray
B(x2)
Connecting Plate
E (x1)
Clamps
C(x1)
Keyboard Stop
D(x1)
Slider Brackets
F(x2)
Pad
G(x1)
Mouse Pad
H(x1)
Power Cable
S-A (x6)
M4x7mm Flat Head Screw
S-B (x8)
M5x12mm Screw
S-C (x12)
M5x12mm Flat Head Screw
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A
B
S-C
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

3
STEP 2
Attach Keyboard Stop (C) to the back of Keyboard Tray (A) using M5x12mm Flat Head Screws (S-C)
and a Phillips screwdriver. Assemble Slider Brackets (D) to Keyboard Tray (A) using M5x12mm Screws
(S-B), and tighten with a Phillips screwdriver. Slider Brackets (D) should protrude from the back of the
keyboard tray assembly.
STEP 3
Assemble Clamps (E) to the Slider Brackets (D) using M4x7mm Flat Head Screws (S-A). Tighten with a
Phillips screwdriver.
STEP 4
Place Mouse Pad (G) on Keyboard Tray (A). Plug Power Cable (H) into Mouse Pad (G) and plug the
other end into a 5V USB power supply.
STEP 5
Place Pads (F) on the underside of each Clamp (E). Place assembled keyboard mount on the edge of
the desktop and tighten Clamps (E).
E
F
G
A
H
E
D
S-A
CA
S-C
D
S-B

LAST UPDATED: 08/29/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303