Vivo MOUNT-VP01W User manual

  
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
-   
  !
"#" $
$ %&
electric drill, phillips screwdriver
Scan the QR code with your mobile device or follow
the link to helpful videos and specifications related to
this product.
'  ( 
-  ' 
)*
-  ( 

-   

-   
+
-  , 
)
-  - 

-  . 
+
-  / !
!
-  0 !
  
-  1 -  2 !

-  '  -  (  -   
- -34$5566 $7854$58 649
1

'$$8:; <4$
- -%
If cables will be
hidden above the
ceiling, route
cables through
large opening in
the ceiling plate of
part A ceiling
mount.
If cables are located below
ceiling, route cables
through the side of the
part A ceiling mount.
<4 
/ '
<4 
/ (
2
Align holes in ceiling plate with wood stud and mark drilling
locations. Use of a stud finder is recommended for finished ceilings.
Drill mm (2.2”) deep holes using 4. mm or 3/16” drill bit.
<4 !
/ '  $  $""
Mount ceiling plate to stud using W-A screws with W-C washers. Do
not use W-B concrete anchors.

Align arms on part B mounting plate with mounting holes in
projector, and mount to projector using screws and washers most
appropriate for your projector. If your projector has 3 mounting
holes, simply remove one of the arms.
<4 )
Hang mounting plate with projector over pre-installed screws on
ceiling mount, making sure plastic oval washers are between the
plate and mount.
<4 
Mark drilling locations in ceiling. Drill 60mm (2.4”) deep holes using
10mm or 3/8” drill bit.
<4 !
/ (   $""
Press W-B concrete anchors into drilled holes, and mount ceiling
plate to ceiling using W-A screws and W-C washers.
3

<"=; "
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
" $ "
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Last Updated: 04/26/2018 4
Secure mounting plate using M-I screws (M x12), M-J metal washers
and M-K plastic washers. Tighten with M-L Allen wrench.
<4 
Adjust angle and rotation of projector.
<4 +