Vivo STAND-V102F User manual

   
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
-  (x8)
M5x12
-  (x8)
M4x12
-   (x8)
M4x16
 (x2)
 (x1)
 (x1)
 (x1) (x1)  (x2)
! (x3) " (x1)
4mm Alle Key
# (x1)
6mm Alle Key
- (x8)
D5
-   (x8)
-  (x8)
M5x16
- -$%&&'' ()&%& '*
+ (x2)
, (x1)

)-. %
2
% 
Install pole cap (K) to top of pole (D).
Assemble pole (D) to base (C) with bolts (H) using 4mm Allen key (I).
% 
% /
For flat back monitor, install VESA plate (A) to monitor using bolts (M-A) or (M-C) and
washers (M-E).
% 0
1%    
1%  '  
For curved back monitor, install VESA plate (A) to monitor using bolts (M-B) or (M-D),
washers (M-E), and spacers (M-F).
Install swivel arms (B) and cable clip (E) to pole (D). Fasten the bolt with the supplied
6mm Allen key (J).

% 2
Store the Allen keys in cable clip (E) for future use.
3
% 3
% 4
Slide the monitors onto the heads of swivel arms (B). Install thumb screws (F) using
bolts (G). Make sure the screws are installed before you rotate the monitors. If needed,
adjust the bolt on the side of the hinge behind the VESA plate to tighten or loosen the
tilt angle using 6mm Allen key (J).
Manage the cables using the installed cable clips.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
*. 5
  
Last updated: 0 /01/18 4
% 6
Be careful not to extend the arms too far forward or backward.
% 7
Adjust monitor alignment using thumb screws (F). If needed, use 6mm Allen key (J) to
turn screw.