Vivo STAND V002R User manual

Vertica Dua Monitor Mount
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Mode STAND V002R
Scan the QR code with your mobile device or follow the link to helpful videos and
specifications related to this product.
- -https//vivo us.com/products/stand v002r
Toos Required
phillips screwdriver
Pac age Contents
A(x1) #(x1) D(x1)
E (x2) F (x1) H(x1)
J (x1) K
3mm (x1)
-M A
M4x12 (x8)
-M #
M5x12 (x8)
-M C
D5 (x4)
)(x2)
I (x5) L
5mm (x1)
M
6mm (x1)
C (x1)
1

Assemb- Steps
Step 1
Slide cable management clip (G) and base cover (H) on to bottom pole (A).
Thread bottom pole (A) onto clamp (C). Tighten grub screws in bottom of
clamp (C) using 3mm allen key (K). Secure clamp (C) to desktop as shown in
diagram.
Step 1 Option A
Step 1 Option #
Remove screw from top of bolt in clamp (C). Stick soft pads (I) to bottom of
grommet base (D). Slide cable management clip (G) and base cover (H) on
to bottom pole (A). Thread bottom pole (A) onto grommet base (D). Tighten
grub screws in bottom of grommet base (D) to using 3mm allen key (K).
Slide metal pad (J) over bolt and slide through grommet hole in bottom of
desktop. Thread into bottom of pole (C).
2
Step 2
Slide cable management clip (G)
over bottom of pole (B). Use pole
connector (F) to attach pole (B) to
pole (A) as shown in diagram.
Step 3
Slide VESA bracket (E) over top of pole (A).
Tighten using mm allen key (L).

Slide the remaining VESA bracket
(E) over top of pole (B). Tighten
using mm allen key (L).
Step 4 Step 5
Attach two bolts (M-A or M-B) and washers (M-C) to top mounting holes of
monitors, making sure to leave 3mm of threads exposed. Align bolts (M-A, M-
B) in VESA plates. Secure using two more bolts (M-A or M-B) and washers (M-
C) in the bottom two holes. Tighten all four bolts using phillips screwdriver.
Step 6
Adjust tension in monitor bracket with 6mm
allen key (M) as shown in diagram.
3

4
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet- Warning
Contact us at
Last Updated: 0 /07/18
Store allen keys (M, L) in cable
management clip (G) for future
adjustment.
Step 7
Adjust as Desired