Vivo STAND-V003E User manual

Triple Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v003e
SKU: STAND-V003E
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x3)
VESA Plate
C(x1)
Arm
D(x1)
Base
M-A (x12)
M4x12mm
Screw
M-D (x12)
M5x16mm
Screw
S-A (x3)
M6x14mm
Screw
M-F (x12)
Spacer
M-E (x12)
M5 Washer
E(x1)
Bottom Pole
F(x1)
Top Pole
G (x1)
Pole Connector
H(x2)
Cable Clip
I (x2)
Height Adjustment
Knob
S-B (x2)
M3x8mm
Screw
M-C (x12)
M5x12mm
Screw
M-B (x12)
M4x16mm
Screw
T-A (x1)
3mm Allen
Wrench
T-B (x1)
4mm Allen
Wrench
T-C (x1)
6mm Allen
Wrench
B(x1)
Bracket
S-C (x1)
Thumbscrew
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD
OR BACKWARD.
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
STEP 2
Slide one Cable Clip (H) and Arm (C) onto
Bottom Pole (E). Tighten Arm (C) at the desired
height using 6mm Allen wrench (T-C).
17.6 lbs
Per Arm
(8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Attach Bottom Pole (E) to Base (D) using M6x14mm
Screws (S-A) and 4mm Allen Wrench (T-B).
E
D
S-A
T-B
HC
E
T-C

4
STEP 3
Thread Pole Connector (G) onto Bottom Pole (E). Thread Top Pole (F) into Pole Connector (G). Tighten
the set screws on Pole Connector (G) using 3mm Allen Wrench (T-A).
STEP 4
Slide one Cable Clip (H) and Bracket (B) onto Top Pole (F) and secure Bracket (B) at the desired height
using 6mm Allen Wrench (T-C).
G
E
F
T-A
H
B
F
T-C

5
STEP 5
Slide monitors with VESA Plates (A) onto Arm (C) and Bracket (B).
STEP 6
OPTION A: Flat Back Monitor
For at back monitors, install VESA Plate (A) to the monitor using M4x12mm Screws (M-A) or
M5x12mm Screws (M-C) and M5 Washers (M-E).
OPTION B: Curved Back Monitor
For curved back monitor, align Spacers (M-F) with mounting holes in the monitor and secure VESA
Plate (A) to the monitor using M4x16mm Screws (M-B) or M5x16mm Screws (M-D) and M5 Washers
(M-E).
AM-A
M-C
M-E
M-F
AM-B
M-D
M-E
A
B
C

6
STEP 7
STEP 8
Manage cables using cable management clips on Arm (C) and Cable Clips (H).
Secure VESA Plates (A) on Arm (C) using Height Adjustment Knobs (I) and M3x8mm Screws (S-B).
Assemble VESA Plate (A) to Bracket (B) using Thumbscrew (S-C). Adjust the tilt using 6mm Allen
Wrench (T-C).
12 3
A
C
I
S-B
B
S-C
T-C
C
H

7
STEP 9
Store Allen Wrenches (T-A, T-B and T-C)
in cable management clips (H) for future
adjustments.
STEP 10
STEP 11
+45 °
-45°
+45 °
-45°
+45 °
-45°
±180 °
±180 °
±180 °
T-A
T-B
T-C
H
Do not move monitors past center of gravity. This could result in tipping.
Level the side monitors by loosening Height Adjustment Knobs (I) using 6mm Allen Wrench (T-C).
T-C
I

LAST UPDATED: 02/21/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303