Vivo STAND-V100W User manual

Moun Tableo Sand
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STAN V100W
Tool Required
phillips screwdriver
Package Conen
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -//vivo u.com/roduc/and v100w
A (x1)
Pole
B (x1)
VES Plate
C (x1)
Base
 (x1)
Cable Clip
E (x2)
M6x12
F (x1)
Thumb Screw
G (x1)
4mm lle Key
H (x1)
6mm lle Key
-M C (x4)
M5x12
- M  (x4)
M5x16
-M A (x4)
M4x12
- M B (x4)
M4x16
-M E (x4)
D5
- M F (x4)
Spacer

Aembl+ Se
2
Se 1
Install height adjustable pole (A) to base (C) with bolts (E), and tighten
with 4mm Allen wrench (G). Attach cable clip (D) to pole.
Se 2
Install VESA plate (B) to monitor using bolts (M-A) or (M-C) and
washers (M-E).
Install VESA plate (B) to monitor using bolts (M-B) or (M-D), washers
(M-E), and spacers (M-F).
Oion A Fla Back Monior
Oion B Curved Back Monior

Se 5
Use cable clip (D) to store Allen wrenches (G, H) for later use.
Se 3
Slide the monitor onto
the head of height
adjustable pole (A). Install
thumb screw (F). Make
sure the screw is
installed before you
rotate the monitor.
Se 4
If needed, use 6mm Allen wrench (H) to adjust the bolt on the side of
the hinge behind the VESA plate to tighten or loosen the tilt angle.
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safe+ Warning
Conac u a
Last updated: 0 /21/18
Se 6
Adjust the height and angle of monitor. To reset height, raise all the
way to maximum height to release the internal latch, and gently
lower to bottom position.
4