Vivo STAND-V300G/W User manual

Triple Monitor Desk Mount -
2 Pneumatic Arms + 1 Fixed
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v300g
SKU: STAND-V300G/W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Pole
B(x1)
Arm Bracket
C(x1)
Clamp
H(x6)
Plastic Cover
T-A (x1)
3mm Allen Wrench
M-B (x12)
M4x30 Screw
M-D (x12)
Spacer
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
M-A (x12)
M4x12 Screw
E(x2)
Monitor Arm
F(x4)
Arm Extension
G (x1)
VESA Plate
I(x2)
Cable Clip
17.6lbs
(8kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• TO PREVENT TIPPING, PLEASE BE CAREFUL NOT TO EXTEND THE ARMS TOO FAR FORWARD
OR BACKWARD.
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
T-B (x1)
5mm Allen Wrench
D(x2)
Sha Collar
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
M-C (x12)
M4x8

3
ASSEMBLY STEPS
STEP 1
Thread Pole (A) onto Clamp (C). Tighten the set screw in the back of Clamp (C) with 3mm Allen
Wrench (T-A) to secure Pole (A) in place.
STEP 2
Slide Sha Collar (D) onto Pole (A). Tighten the handle on Sha Collar (D) to secure it in place. Slide
Arm Bracket (B) onto Pole (A) to that it rests on Sha Collar (D). Tighten the screw in the back of Arm
Bracket (B) with 5mm Allen Wrench (T-B).
A
C
T-A
A
D
B
T-B

4
Place an Arm Extension (F) on either side of Arm Bracket (B). Attach the second set of Arm
Extensions (F) to the first set. Tighten the set screws in the back of Arm Extensions (F) using 3mm
Allen Wrench (T-A). Slide Sha Collar (D) onto Pole (A). Tighten the handle on Sha Collar (D) to
secure it in place.
STEP 4
STEP 3
OPTION A: Flat Back Monitor
Mount Monitor Arm (E) to your monitor using M4x8 Screws (M-C) or M4x12 Screws (M-A).
NOTE: Hand tighten screws to avoid stripping the plastic screw heads.
A
F
B
D
E
M-A
T-A
M-C

5
STEP 4 (Continued)
OPTION B: Curved Back Monitor
Mount Monitor Arm (E) to your monitor using M4x30 Screws (M-B) with Spacers (M-D).
STEP 5
Mount VESA Plate (G) to your monitor using M4x8 Screws (M-C) or M4x12 Screws (M-A)
or M4x30 Screws (M-B). If necessary, Spacers (M-D) may be used.
OR
M-A
M-D
G
M-B
M-C
M-D

6
STEP 7
Insert Plastic Covers (H) into Monitor Arms (E) and Arm Extensions (F). Adjust the tilt of
Monitor Arms (E) and VESA Plate (G) using 5mm Allen Wrench (T-B). The tension of Monitor Arms (E)
can be adjusted using 5mm Allen Wrench (T-B).
STEP 6
Mount Monitor Arms (E) onto Arm Extensions (F). Slide VESA Plate (G) onto Pole (A). Tighten set
screws in the back of Monitor Arms (E) and VESA Plate (G) using 3mm Allen Wrench (T-A).
VESA Tilt Adjustment
T-A
E
G
A
F
H
E
F
G
T-B

7
STEP 8
Attach Cable Clips (I) to Pole (A). Manage monitor cables into cable covers on underside of Monitor
Arms (E), Arm Extensions (F) and Cable Clips (I). Leave enough slack to allow full adjustment and
motion of arms.
I
A
E
F

LAST UPDATED: 02/10/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303