Vivo DESK-E144WC User manual

White & Light Wood Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e144bn
SKU: DESK-E144WC
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Desktop
E (x2)
Foot
I (x1)
Motorized Leg
S-A (x14)
M6x11mm
Screw
T-A (x1)
2mm Allen
Wrench
T-B (x1)
5mm Allen
Wrench
S-B (x39)
M5x16mm
Screws
S-C (x8)
M6x35mm
Screws
S-D (x14)
Wooden
Dowels
M (x17)
Anti-Vibration
Pads
N (x2)
Headphone
Hook
O (x4)
Rectangle
Connector
P (x2)
Square
Connector
J (x1)
Control Panel
K (x1)
AC Adapter
L (x2)
Cable Clips
F (x2)
Sync Rod
G (x1)
Connecting
Bracket
H (x1)
Leg
B (x1)
Le Crossbar
C (x1)
Right Crossbar
D (x2)
Side Brackets

3
154lbs
(70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
Phillips
Screwdriver
Attach Le Crossbar (B) to Leg (H) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B). Connect
Right Crossbar (C) to Motorized Leg (I) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
I
H
I
D
H
T-B
S-A
T-B S-A
B
C
STEP 2
Connect Side Brackets (D) to Motorized Leg (I) and Leg (H) using M6x11mm Screws (S-A) and 5mm
Allen Wrench (T-B).

4
STEP 3
STEP 4
Attach Foot (E) to Leg (H) and Motorized Leg (I) using M6x35mm Screws (S-C) and 5mm Allen
Wrench (T-B).
Use Connecting Bracket (G) to join leg assemblies together by securing it over Le Crossbar (B) and
Right Crossbar (C) using M6x11mm Screws (S-A) and 5mm Allen Wrench (T-B).
E
H
I
S-C
T-B
C
S-A
T-B
G
B

5
STEP 6
STEP 5
K
1
2
3
4
T-A
Loosen the knob on the Sync Rod (F) and extend the hex sha. Insert hex sha into the Leg (H),
making sure the metal retaining ring makes contact with the Leg (H). While holding the hex sha with
one hand, extend Sync Rod (F) onto the spline sha of Motorized Leg (I). Tighten Sync Rod (F) using
2mm Allen Wrench (T-A). Retighten knob. Apply Anti-Vibration Pads (M) to top of frame assembly.
M
D
H
F
I
S-D
A
3
1
2
4
Place Wooden Dowels (S-D) into pre-drilled holes in Desktop (A) pieces, then slide together to form
one desktop piece, as shown below. [Desktop pieces are labled 1 thru 4 and should be assembled as
shown below]

6
STEP 7
STEP 6 (Continued)
Flip frame assembly over and secure to assembled Desktop (A) using M5x16mm Screws (S-B) and
a Phillips screwdriver. Screws will be installed into Side Brackets (D) and Connecting Bracket (G).
Attach Headphone Hook (N) and Controller (J) to Desktop (A) using M6x16mm Screws (S-C)and a
Phillips screwdriver.
N
S-B
G
S-B
Secure desktop assembly using Rectangle and Square Connectors (O, P), M5x16mm Screws (S-B), and
a Phillips screwdriver.
S-B
S-B
P
O
3
1
2
4

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
Connect cable from Motorized Leg (I) to Control Panel (J), as shown below. Connect AC Adapter (K)
to Control Panel (J). Secure cables to Desktop (A) using Cable Clips (L).
L
K
I
A
J
STEP 8

LAST UPDATED: 09/06/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr