Vivo MOUNT-V001G User manual

1
Single Monitor Wall Mount
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: MOUNT V001G
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
Tools Required:
phillips screwdriver
Package Contents
- W A x2) - W B x2) - W C x2)
-M A x4)
M4x12
-M B x4)
M5x12
- M C x4)
D5
A x1) C x1)
5mm
B x2)

2
Assembly Steps
Step 1
For concrete or brick wall installation, use a pencil to mark drilling
locations and drill 2/4” deep holes using a 3/8” bit. Mount arm (A) to
wall using screws (W-A) , anchors (W-B), washers (W-C).
Option B: Concrete/Brick Wall Installation
Use a pencil to mark drilling location for wood beam and drill 2.2”
deep holes using 3/16”bit. Use of a stud finder is recommended.
Mount arm (A) to wall using screws (W-A) and washers (W-C). Do
NOT use anchors (W-B) for wood beam installation.
Option A: Wood Wall Installation
Press covers into screw holes.
Step 2

3
Install screws (M-A) or (M-B) with washers (M-C) in top two holes of
the monitor, leaving 3mm of space between the screw heads and
the monitor.
Hang monitor over top two slots of VESA plate, install two bottom
screws, and then tighten top screws,
Step 3 Continued) Step 4
Tighten the socket screw if the joints are making a popping sound.
Adjust arm tension by turning screw with Allen wrench (C). Turn
clockwise to reduce tension and turn counterclockwise to increase
tension. The tension should be just enough to hold your monitor In
place without lifting itself up. If needed, adjust bolts on the sides of
the hinge behind the VESA plate to tighten or loosen the tilt angle.
Step 5
Remove cable cover by
removing the screw
underneath each one.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safety Warning
Contact us at:
Last updated: /1/2018 4
Step 6
Adjust as Desired
Insert cables and replace covers while making sure the cables have
enough slack to allow enough free movement of the arm.