Vivo MOUNT-VW120M User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw120m
SKU: MOUNT-VW120M
Full Motion Extra Large TV Wall Mount
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Mount
B (x1)
Le VESA
Bracket
C (x1)
Right VESA
Bracket
D (x4)
Velcro Strap
E (x1)
Mounting
Template
S-A (x2)
M4x8mm Thumbscrew
M-A (x4)
M6x14mm Screw
M-B(x4)
M8x16mm Screw
M-C (x4)
M6x30mm Screw
M-D (x4)
M8x35mm Screw
M-F (x4)
Small Spacer
M-G (x4)
Large Spacer
W-A (x6)
ST8x90mm Screw
W-B (x6)
Concrete Anchor
W-C (x6)
Large M8 Washer
T-A (x1)
Bubble Level
T-B (x1)
Wrench
M-E (x4)
M8 Washer
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
264 lbs
(120 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
Drill Pencil
Phillips
Screwdriver
Stud Finder 13mm Socket
Wrench
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete If unsure, please contact us at vivo-us.com,
email at [email protected]om, or call us at 309-278-5303.

3
ASSEMBLY STEPS
STEP 1
Stud Mounting:
Find desired mounting location using a stud
nder. Hold or tape Mounting Template (E) up
to the desired mounting location using Bubble
Level (T-A) ensuring the Template is level. Mark
mounting locations that align with a stud using
a pencil. Drill 3.5” (90mm) deep pilot holes on
marked locations using a 0.25” (6mm) drill bit.
Install Mount (A) to wall using ST8x90mm Screws
(W-A), Large M8 Washers (W-C), and a 13mm
Socket Wrench.
N:
Using 2 people is highly recommend for
installing the mount onto the wall.
Concrete/Brick:
Find desired mounting location and hold or tape
Mounting Template (E) on the wall using Bubble
Level (T-A) ensuring the template is level. Mark
mounting locations so that 4 screws are used on
the upper section of the mounting plate and 2
for the lower. Drill 3.7” (95mm) deep pilot holes
on marked locations using a 0.50” (12mm) drill
bit. Install Mount (A) to wall using Concrete
Anchors (W-B), ST8x90mm Screws (W-A), Large
M8 Washers (W-C), and a 13mm Socket Wrench.
T-A T-A E
E
A
A
W-C
W-C
W-B
W-A W-A

4
STEP 2
VESA Patterns Greater Than 200mm in Width:
Place Le & Right VESA Brackets (B,C) onto the back of TV, so that the Locking Arms (B1, C1) are
closest to the center of the display. Secure using appropriate screws (M-A thru M-D), M8 Washers
(M-E), and a Phillips Screwdriver. If needed, use Spacers (M-F, M-G).
B
C
VESA Patterns 200mm Wide:
Place Le & Right VESA Brackets (B,C) onto the back of TV, so that the locking arms are closest to
the edge of the display. Secure using appropriate screws (M-A thru M-D), M8 Washers (M-E), and
a Phillips Screwdriver. If needed, use Spacers (M-F, M-G).
B
C
B1
C1
C1
B1

5
STEP 3
Ensure Locking Arms (B1, C1) are in the open position, facing downward, and place the TV with VESA
brackets onto Mount (A) with assistance.
A
Move Locking Arms (B1, C1) on VESA Brackets to locking position, pointing upward, and secure
with M4x8mm ThumbScrews (S-A).
S-A
B1
C1
B1
C1

6
STEP 4
STEP 5
Route cables through Cable Cover (A1) on underside of Mount (A) and secure with Velcro Straps (D).
To ensure the TV is level, use Wrench (T-B) to slightly loosen the screws on the back of the mount head.
This will allow the TV to rotate. Use Bubble Level (T-A) to check that the TV is level and then re-tighten
screws using Wrench (T-B).
A
A1
D
T-A
T-B

7
STEP 6
Loosen screws on side of the mount head with Wrench (T-B) to adjust the tilt.
T-B

LAST UPDATED: 01/10/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs):< 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303