VXI Convertible Headset 37 SERIES User manual

© 2006 VXI Corporation PN 201852B
VXI CORPORATION
One Front Street, Rollinsford, NH 03869
603-742-2888 / 800-742-8588
www.vxicorp.com
VXI LIMITED WARRANTY
1. If your VXI headset fails to work for any reason during the first two years from the date of
purchase as shown by the purchaser's warranty registration, VXI will repair or replace the headset at
its election, free of charge. To register your VXI product, you may do so online at www.vxicorp.com
or by calling customer service at 800-742-8588. Without warranty registration, the warranty period
begins on the date of manufacture. All products returned to VXI after the two-year warranty period
will be repaired as "out of warranty" products, and purchaser will be billed for such repairs pursuant
to the Out-of-Warranty Repair provisions set forth below.
2. The obligations of VXI under this warranty shall be limited to repair or replacement (at our option)
of any part returned, freight pre-paid, to VXI. Returned products require a Return Authorization
that may be requested from VXI at 800.742.8588 or www.vxicorp.com.
3. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties and the foregoing
exclusions may not apply to you.
4. In no event shall VXI be responsible for any other damages whatsoever including direct, indirect,
special, incidental, consequential or otherwise for breach of this or any other warranty, express or
implied.
OUT-OF-WARRANTY REPAIRS
VXI will repair out-of-warranty product for a charge that is applicable as of the date of receipt by
VXI. Call 1-800-742-8588 for current repair charges and see return details above. Out-of-warranty
repairs are warranted to be free from defects in material and workmanship for ninety (90) days.
Products returned to VXI for Out-of-Warranty repairs, freight prepaid and with proper Return
Authorization, will be return shipped to the customer at VXI's expense within five (5) days of VXI's
receipt of payment.
PASSPORT 37 SERIES CONVERTIBLE HEADSET
USER GUIDE
VXI Corporation www.vxicorp.com
Two-wearing styles:
Over-the-ear or over-the-head.

8
9
10
10
11 12a
12b
B. ASSEMBLY FOR LEFT EAR PLACEMENT
Position receiver (8) so it is almost touching the curved part of the headset.
Locate the small circle (9) on one side of the earpiece.
Hold the over-the-ear headset in your hand with the small circle facing you.
Place receiver on top of the headband's receiver housing (10). Be sure to align the
small circle between the "cut-out" section on the left side of the housing (11). Place
your thumb on the receiver and press it downward into place. Be sure that the
receiver rests firmly under the two latches (12a & 12b).
2. Adjust the metal headband either in or out for best fit.
3. Place headband over your head with cushion against your ear.
4. Position microphone a finger's width away from your lower lip.
The microphone housing will have either the word TALK or a painted dot
imprinted on it. This mark must face your mouth.
5. Use clothing clip to keep headset stable.
REMOVING THE RECEIVER FROM THE HOUSING
1. Hold the unit in one hand.
2. With your other hand, gently lift receiver out of the housing as shown (13).
Lift here Place thumb here
13
3
4
5
6
7a
7b
Plantronics is a registered trademark of Plantronics, Inc. GN Netcom is a registered trademark of GN Netcom,
A. ASSEMBLY FOR RIGHT EAR PLACEMENT
Position receiver (3) so it is almost touching the curved part of the headset.
Locate the tiny screw (4) on one side of the earpiece.
Hold the over-the-ear headset in your hand with the screw facing you.
Place receiver on top of the headband's receiver housing (5). Be sure to align
the screw between the "cut-out" section on the right side of the housing (6).
Place your thumb on the receiver and press it downward into place. Be sure
that the receiver rests firmly under the two latches (7a & 7b).
1
2
WEARING OVER-THE-EAR
1. Swing the round receiver downward (1).
2. Choose left or right ear for placement.
3. Place curved earpiece over the top of your ear and
slide behind the ear. Gently center the receiver on your
ear (2).
4. Position microphone a finger's width away from
your lower lip. The microphone housing will have
either the word TALK or a painted dot imprinted on it.
This mark must face your mouth.
5. Secure the clothing clip to keep headset stable.
ATTACHING THE HEADBAND
1. Choose left or right ear for placement.
To wear headset on your right ear, follow directions A.
The Passport 37 headset is available in three versions for compatibility
with VXI (Passport V-series), Plantronics (Passport P-series), or GN Netcom
(Passport G-series) quick disconnects.
Please follow directions below for your choice of wearing style.