WAGNER TITANUS SUPER-SENS User manual

Air Sampling Smoke Detection System
®
TITANUS SUPER · SENS
Technical Manual
www.acornfiresecurity.com
www.acornfiresecurity.com

www.acornfiresecurity.com
www.acornfiresecurity.com

Air Sampling Smoke Detection System
TITANUS SUPER·SENS®
Technical Manual
Revision a
WAGNER Group GmbH
Schleswigstraße 1 - 5
D-30853 Langenhagen
Telephone +49 (0) 511 / 97383-0
Telefax +49 (0) 511 / 97383-140
E-Mail 0H[email protected]
Internet www.wagner.de
item number:
dated:
supersedes:
69-30-0176
02/09
08/01
www.acornfiresecurity.com
www.acornfiresecurity.com

www.acornfiresecurity.com
www.acornfiresecurity.com

Contents TITANUS SUPER·SENS®
TSS_inhalt-en-e Data: 02/09
Contents
0 General 0 – 1
0.1 Introduction 1
0.2 Safety Information 1
0.3 Guarantee 2
0.4 Copyright 2
0.5 Packaging 3
0.6 Disposal 3
1Product Description 1 – 1
1.1 Characteristics of TITANUS SUPER·SENS®1
1.2 Areas of Application 3
2Technical Description 2 – 1
2.1 System Description 1
2.1.1 Function 1
2.1.2 Features 4
2.2 TITANUS®and Accessories 7
2.2.1 Overview 7
2.2.2 Basic device TITANUS®8
2.2.3 Diagnostic tool DIAG+ 11
2.2.4 Remote display units 15
2.2.5 Device supports 16
2.3 Pipe system 16
2.3.1 Overview of available pipe components 16
2.3.2 Air sampling points for room monitoring 18
2.3.2.1 Aspiration-reducing film sheets 18
2.3.2.2 Air flow reducer clips 19
2.3.3 Ceiling feed-through for hidden installations 21
2.3.4 Air filter for dusty areas 22
2.3.5 Air return for pressurised and dusty areas 23
2.3.6 Noise suppressor 24
2.3.7 Steam trap for humid areas 25
3Technical Data 3 – 1
3.1 TITANUS®1
3.2 Accessories – TITANUS®3
3.3 Pipe system TITANUS®4
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Contents
TSS_inhalt-en-e Data: 02/09
Contents
4Design 4 – 1
4.1 General 1
4.1.1 Regulations 2
4.1.2 Pipe system 3
4.1.3 Air flow monitoring 7
4.1.4 Sensitivity 9
4.1.5 Project planning limits 10
4.2 Project planning 11
4.2.1 Project planning guidelines 11
4.2.1.1 Determining the necessary accessories 11
4.2.2 Pipe accessories 12
4.2.3 Sensitivity and pipeline project planning 13
4.2.3.1 Pipeline project planning with pipe accessories 13
4.2.4 Aperture diameter 17
4.3 Special project planning 20
4.3.1 Project planning for individual aperture monitoring 20
4.3.1.1 I-Pipe system 20
4.3.1.2 U-Pipe system 22
4.3.1.3 M-Pipe system 24
4.3.1.4 Double-U-Pipe system 26
4.3.2 Simplified pipe project planning 28
4.3.2.1 I-pipe system 28
4.3.2.2 U-pipe system 29
4.3.2.3 M-pipe system 30
4.3.2.4 Double U-pipe system 31
4.3.3 Project planning with long intake lines 32
4.3.4 Project planning for forced air flow 33
4.3.4.1 Detection of climatic cabinets with circulating air 33
4.3.4.2 Detection of air conditioning ducts 38
4.4 Mains supply 42
5Installation of TITANUS®5 – 1
5.1 General 1
5.2 Opening the TITANUS®air sampling smoke detection system 2
5.3 Settings 3
5.3.1 Base board 3
5.3.1.1 Delay Period of the Air Flow Fault 3
5.3.1.2 Activating Threshold of the Air Flow Monitoring 4
5.3.1.3 Delay Period of the Alarm Activation 4
5.3.1.4 Setting of the Response Sensitivity 5
5.3.1.5 Fault and Alert Alarm Display 6
5.3.1.6 Alarm Thresholds 7
5.3.1.7 Setting of the Ventilator Voltage 7
5.4 Installation of the reset board 9
www.acornfiresecurity.com
www.acornfiresecurity.com

Contents TITANUS SUPER·SENS®
TSS_inhalt-en-e Data: 02/09
Contents
5.5 Mounting Location 9
5.5.1 Fixing of the air sampling system TITANUS®9
5.5.2 Connection of the air sampling pipe 11
5.6 Electrical Connection 12
5.6.1 Connection diagram 13
5.6.2 Connection without central fire panel 14
5.6.3 Connection to central fire panel with reset button or
relay contact 15
5.6.4 Connection to central fire panel with reset board 16
5.7 Application of TITANUS®and fire detction system AlgoRex®17
5.7.1 Collective connection 17
5.7.1.1 Connection diagram collective 18
5.7.2 Application of TITANUS®with AlgoRex®line modules 19
5.7.2.1 Installation of AlgoRex®-line modules in the
TITANUS®- housing 19
5.7.2.2 TITANUS®and AnalogPLUS-Technology 21
5.7.2.3 TITANUS®and interactive Technology 22
5.8 Application TITANUS®and SigmaSys-Technology 23
5.8.1 Mounting of the contact coupler SPF 5300 for the extension 24
5.8.2 Electrical Connection 25
5.9 TITANUS®in the network system 26
5.9.1 Installation network board in TITANUS®26
5.9.2 Connecting the network module 27
5.10 Remote display units 28
5.10.1 Connection of the remote display unit to TITANUS® 28
5.10.2 Remote display housing design 30
5.10.3 Remote display unit for 19" sub-rack 31
5.10.4 Electrical Connection 32
5.11 Data Log 33
6Installation of the pipe system 6 – 1
6.1 Linear expansion of the pipe system 4
6.2 Patented air sampling points 6
6.3 Ceiling lead through 8
6.4 Monitoring in forced air flow systems
(ventilation or climatic applications) 10
6.4.1 Detection at air inlets/outlets 10
6.4.2 Detection in bypass systems 10
6.5 Filter 11
6.5.1 Installation of air filter, type LF-AD-x 11
6.5.2 Mounting of the special filter type SF-400/650 12
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Contents
TSS_inhalt-en-e Data: 02/09
Contents
6.6 Air return 13
6.7 Noise suppressor 14
6.8 3-Way ball valve 15
6.8 Steam trap 17
6.9 Test adapter 18
7Commissioning 7 – 1
7.1 Adjustment air flow sensor 3
7.1.1 Adjustment dependent on the air pressure 3
7.1.2 Adjustment independent of the air pressure 5
7.2 Detector head and alarm transmission 6
7.3 Air Flow Monitoring 6
7.4 Fault signal transmission 7
7.5 Operational check of TITANUS®8
7.5.1 Preparation of the operational check 8
7.5.2 Operational Check 9
8Maintenance 8 – 1
8.1 Visual Check 1
8.2 Smoke Detector and Alarm Transmission 1
8.3 Pipe System 1
8.4 Exchange of the Detector Head 2
8.5 Exchange of the air flow sensor filter 4
8.4 Changing the air filter LF-AD –x 5
8.7 Changing special air filter SF-400/650 6
8.8 Check of the Air Flow Sensor Adjustment 7
8.9 Air flow monitoring 8
8.10 Fault signal transmission 8
8.11 Maintenance intervals 8
www.acornfiresecurity.com
www.acornfiresecurity.com

Contents TITANUS SUPER·SENS®
TSS_inhalt-en-e Data: 02/09
Contents
Appendix
Air Pressure Adjustment Tables
Projection Tables
System Product List
Certificate of Approval of Components and Systems
EMC Declaration of Conformity
Inspection Protocol
Glossary
Conformity certification pursuant to EU
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Contents
TSS_inhalt-en-e Data: 02/09
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®General
TSS_00_A-en-e Data: 02/09 0– 1
0 General
0.1 Introduction
This manual is for installers of air sampling smoke detection systems, in
particular for engineers, technicians, and fitters etc. who have technical
knowledge in the field of smoke detection technology but who are
possibly working with this device for the first time.
For damage and faults resulting from the non-observance of this manual
WAGNER Group GmbH, called WAGNER in the following, does not
assume liability.
This manual refers to the air sampling smoke detection systems TITANUS
SUPER·SENS®. These systems may only be used for early and very early
smoke detection.
0.2 Safety Information
The following symbols identify parts of the text in this manual which
require special attention so that damage can be avoided and so that
operations can run smoothly.
This symbol warns against actions which might cause damage if it is
ignored.
This symbol warns against actions which could cause operational
breakdowns if it is ignored.
Operational improvements can be achieved if this symbol is observed.
ATTENTION
INSTRUCTION
TIP
www.acornfiresecurity.com
www.acornfiresecurity.com

General TITANUS SUPER·SENS®
0– 2 Data: 02/09 TSS_00_A-en-e
0.3 Guarantee
The manual is subject to technical modification without notice and makes
no claim to completeness.
In principle our “Terms and Conditions of Supply and Assembly” apply.
No claims under the guarantee or for liability can be made for damage to
persons or property if they are based on one or more of the following
causes:
•insufficient observance of the instructions about the design,
assembly of the aspirating smoke detection system, assembly of the
pipe system, commissioning and maintenance
•use of the aspirating smoke detection system in contravention of the
intended use
•insufficient monitoring of working parts
•improperly executed repairs
•unauthorised constructional changes to the aspirating smoke
detection system
•force majeure
0.4 Copyright
The copyright in this Technical Manual remains with WAGNER.
The manual is designed exclusively for the assembler and his
colleagues.
Reproduction of the manual, including extracts, is not allowed. Copying
or distribution of the manual in any form is only allowed with permission
in writing from WAGNER.
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®General
TSS_00_A-en-e Data: 02/09 0– 3
0.5 Packaging
The individual air sampling smoke detection systems are packed in
accordance with the anticipated transport conditions. Exclusively
environmentally friendly materials were used for the packaging.
The packaging is intended to protect the air sampling smoke detection
system from being damaged until it is installed. For that reason, it should
only be removed from its packaging shortly before installation.
The packaging material is to be disposed of in accordance with
applicable statutory provisions and local regulations.
zDispose of the packaging materials in an environmentally friendly
manner.
zObserve local disposal regulations.
Packaging materials are valuable raw materials and in many cases can
be re-used or expediently processed and recycled. Improper disposal of
packaging materials can harm the environment.
0.6 Disposal
If no take-back or disposal agreements have been made, disassembled
components are to be taken for recycling:
zTake metal parts for scrapping.
zTake plastic parts to be recycled.
zSort the remaining components by material quality and dispose of
them.
INSTRUCTION
www.acornfiresecurity.com
www.acornfiresecurity.com

General TITANUS SUPER·SENS®
0– 4 Data: 02/09 TSS_00_A-en-e
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Product Description
TSS_01_A-en-e Data: 02/09 1– 1
1 Product Description
1.1 Characteristics of
TITANUS SUPER·SENS®
TITANUS SUPER · SENS® is the latest generation of the well-proven
WAGNER-air sampling smoke detection systems. As highly sensitive
device TITANUS SUPER · SENS® reaches a detection quality not known
so far. In particular, it can be used for room monitoring in case of high
value concentration and to control climatic cabinets or climatic ducts in
case of high air exchange rates. TITANUS SUPER·SENS®can even be
used in critical areas such as EDP-rooms.
High Sensitivity The device has a display sensitivity of 0.0025%/m light obscuration.
According to the application further sensitivities can be set at the base
board. Thus, a large detection range throughout all typical standard fire
types is possible.
Network System By means of an optional network board several TITANUS
SUPER·SENS® can be connected to form a network. Through a central
network unit the operator can monitor the whole installation as far as
smoke level, air flow values etc. are concerned.
Diagnostic Device The diagnostic device permits a quick and reliable fault localization for
maintenance and service. The reading out of the current device state is
effected by means of an optical data transmission.
Safe Air Flow Monitoring Like point-type detectors, which are electronically monitored to detect line
fractures and short circuits, air sampling systems require a complex and
safe air flow monitoring. The unique air flow sensor technology used in all
WAGNER-air sampling systems guarantees the detection of faults such
as pipe fracture or blockage of single air sampling points.
The air flow monitoring is temperature compensated and can be
independent of the air pressure.
Patented Air Sampling
Points Depending on the required project planning the air sampling points have
defined drill hole diameters. For these exact air sampling points
WAGNER has developed patented aspiration-reducing film sheets
with marking tapes and clips that permit an easy mounting and avoid
secondary noise e.g. „whistling“.
Temperature Range TITANUS SUPER·SENS®can be operated in a temperature range
between -20°C and +60°C. Thus, in contrast to conventional highly
sensitive early smoke detection systems operation below 0°C is possible
for the first time.
www.acornfiresecurity.com
www.acornfiresecurity.com

Product Description TITANUS SUPER·SENS®
1– 2 Data: 02/09 TSS_01_A-en-e
Project Planning of
Point-Type Detectors The air sampling points can be compared to point-type detectors. The
monitoring areas comply with the valid national regulations.
Choice of ventilator
voltage The fan voltage can be set according to project planning by re-plugging
the plug-in jumpers.
With TITANUS SUPER·SENS® devices, the fan voltage can be set
between 12 V and 15 V by means of the plug-in jumpers on the base
board.
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Product Description
TSS_01_A-en-e Data: 02/09 1– 3
1.2 Areas of Application
The air sampling smoke detection system TITANUS SUPER·SENS®is a
technology used for early smoke detection and very early smoke
detection for rooms and equipment.
Principle Air samples are drawn from the protected area via a pipe system with
defined air sampling points and passed to the detector module.
It is particularly suitable for areas in which point-type detectors cannot be
used or only under certain conditions.
In particular these are areas:
•with high fire risk
•where a high detection sensibility is required
•with limited access and where point-type detectors are difficult to
install or service
•which are air conditioned
•which have a greater height than admissible for point-type detectors
•where point-type detectors are undesirable for aesthetic reasons
•where electromagnetic fields have an impact
•which are exposed to high or low temperatures
•where filters are required due to impurities in the atmosphere
•which must be protected from vandalism.
www.acornfiresecurity.com
www.acornfiresecurity.com

Product Description TITANUS SUPER·SENS®
1– 4 Data: 02/09 TSS_01_A-en-e
TITANUS®is suitable for:
Room protection
Rooms such as:
•floor voids, ceiling voids
•tunnels, ducts, voids with difficult access
•storage areas, high-rack storage, elevator shafts
•museums, cultural centre’s
•deep-freeze storage
10
98
7
6
5
4
3
2
1
TITANUS SUPER·SENS
®
109
8
7
6
5
4
3
2
1
TITANUS SUPER·SENS
®
Fig. 1.1: Sketch: room monitoring with the TITANUS®air-sampling smoke detection system
www.acornfiresecurity.com
www.acornfiresecurity.com

TITANUS SUPER·SENS®Product Description
TSS_01_A-en-e Data: 02/09 1– 5
Room monitoring
with air conditioning Room monitoring takes place
•in air-conditioned rooms for servicing etc
•in ventilation ducts
•of floor voids, ceiling voids
•in EDP rooms, E-distribution cabinets, transformer cells
•in climatic cabinets (see fig. 1.2) or
•at air conditioning ducts in the by-pass
convection
air
conditioning
system
TITANUS
®
climatic duct
TITANUS
®
TITANUS
®
Fig. 1.2: Sketch: Monitoring possibilities of a convection air conditioning cabinet or air
conditioning duct
www.acornfiresecurity.com
www.acornfiresecurity.com

Product Description TITANUS SUPER·SENS®
1– 6 Data: 02/09 TSS_01_A-en-e
www.acornfiresecurity.com
www.acornfiresecurity.com