Contents
1 SAFETY REQUIREMENTS _____________________ 28
2 INTRODUCTION TO WORKING WITH THE MORTAR
SPRAYING MACHINES PLASTCOAT 25 AND 35 __ 29
2.1
PlastCoat 25 and 35 __________________________ 29
2.2 What materials can be sprayed?_________________ 29
3 TECHNICAL DATA PLASTCOAT 25 AND 35 ______ 29
4EQUIPMENT OVERVIEW MORTAR SPRAYING
MACHINES PLASTCOAT 25 AND 35 ____________ 30
4.1 Control unit ________________________________ 31
4.1.1 Symbols on the changeover switch ______________ 31
4.2 Drive ______________________________________ 31
4.3 Receptacle _________________________________ 31
Accessories for the receptacle __________________ 32
4.3.1 Sliding cover ________________________________ 32
4.3.2 Sack mangle ________________________________ 32
4.3.3 Container suction system ______________________ 32
4.4 Compressor (accessory) ______________________ 32
4.5 Mortar hose with electrical remote control _____ 32
4.6 Spray lance with automatic control ____________ 33
4.7 Spray lance without automatic control _________ 33
5 TRANSPORT________________________________ 33
5.1 Transport using a crane________________________ 33
6 COATING MATERIALS EQUIPMENT TABLE
PLASTCOAT 25 AND 35 ___________________ 34/35
7 PLACING INTO OPERATION _______________ 3638
8 General requirements for application
technology _________________________________ 38
9 FITTING ACCESSORIES ___________________ 39/40
9.1 Compressor _________________________________ 39
9.2 Sack mangle ________________________________ 39
Using coating materials in sacks_________________ 40
9.3 Container suction system ______________________ 40
10 PLACING OUT OF OPERATION AND CLEANING _40
10.1 Cleaning the mortar hose _____________________ 40
10.2 Cleaning device and changing pump jacket _______ 41
10.3 Cleaning spray lance __________________________ 41
11 MALFUNCTION CHECKLIST _______________ 42/43
12 SERVICING _________________________________ 43
Electrical equipment __________________________ 43
Long-term storage ___________________________ 43
13 SPARE PARTS LIST PLASTCOAT 25 AND 35 ____ 44
SPARE PARTS ILLUSTRATION
PLASTCOAT 25 AND 35 ______________________ 97
14 SPARE PARTS LIST SPRAY LANCE WITH
AUTOMATIC CONTROL_______________________ 19
SPARE PARTS ILLUSTRATION SPRAY
LANCE WITH AUTOMATIC CONTROL___________ 97
15 SPARE PARTS LIST SPRAY LANCE
WITHOUT AUTOMATIC CONTROL _____________ 19
SPARE PARTS ILLUSTRATION SPRAY
LANCE WITHOUT AUTOMATIC CONTROL_______ 97
16 SPARE PARTS LIST AND SPARE PARTS
ILLUSTRATION COMPRESSOR V 400__________ 20
17 SPARE PARTS LIST AND SPARE PARTS
ILLUSTRATION CONTAINER SUCTION SYSTEM 21
18 ACCESSORIES PLASTCOAT 25 AND 35 ________ 22
ACCESSORIES ILLUSTRATION
PLASTCOAT 25 AND 35 ___________________ 98/99
WAGNER-customer service depots __________________ 112
Important notes on product liability_________________ 103
Warranty ____________________________________103/104
Declaration of conformity______________________ 109
contents
