WAGNER W 600 FLEXIO 18V Quick guide

wagner-group.com
UNIVERSAL SPRAYER
W 600 FLEXIO 18V
TRANSLATION OFTHE ORIGINAL
OPERATING INSTRUCTIONS
EN

W 600 Flexio 18V
b
AB
a
11
15
16
6
9
4
53
1
12
14
18
17
19
7
OVERVIEW
20
8
2
10
13
21
20

W 600 Flexio 18V
click
c
a
b
1
2
1

I = ON
0 = OFF

W 600 Flexio 18V
2
1

A B C
+

1

A B

12

W 600 Flexio 18V
5-15 cm

20-30 cm


A
B
C

1
1
2
3


1
2
3

W 600 Flexio 18V


4

2
1
22
1
2
3

W 600 Flexio 18V
12
3
4
5
6
7
12
7
8
34
5
6
9
1
2
3
3

W 600 Flexio 18V
3
2
1
SPARE PARTS
45
MANY THANKS FOR PLACING YOUR TRUST IN US
We would like to congratulate you on purchasing this brand product from Wagner;
we are sure that you will enjoy working with it greatly.
Please read the Operating Manual carefully and observe the safety information
before starting the device. Store the Operating Manual in a safe place close to the
product in case it needs to be used by someone else.
We would be happy to be of assistance if you have any questions, suggestions or requests.
Please contact us via the phone number included on the back page or via our homepage,
www.wagner-group.com/service.

9
W 600 Flexio 18V EN
Contents
1. Explanation of symbols used .....................................................9
2. General power tool safety warnings ............................................10
3. Safety Instructions for Spray Guns ..............................................13
4. Safety instructions for the charger and battery..................................14
5. Description/ Scope of delivery .................................................15
6. Field of application ............................................................15
7. Preparation of the workplace (for interior wall paint) ............................16
8. Charging ......................................................................16
9. Preparation of the Coating Material ............................................17
10. Start-up ......................................................................17
11. Selecting the Spray Setting (Wall Extra I-Spray spray attachment) .............. 18
12. Selecting the Spray Setting (Standard spray attachment) ......................18
13. Adjusting the Material Volume (Wall Extra I-Spray spray attachment) ........... 19
14. Adjusting the Material Volume (Standard spray attachment) ...................19
15. Setting the Amount of Air (Fig. 11) ............................................19
16. Spray Technique..............................................................20
17. Interruption of Work ..........................................................20
18. Taking Out of Operation and Cleaning......................................... 21
19. Cleaning the Wall Extra I-Spray spray attachment ............................. 21
20. Cleaning the Standard spray attachment ..................................... 22
21. Maintenance ................................................................. 23
22. Spare Parts ...................................................................23
23. Accessories...................................................................25
24. Correction of Malfunctions....................................................25
25. Technical Data................................................................ 26
26. Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
27. Important Note regarding Product Liability! ...................................27
1. Explanation of symbols used
This symbol indicates a potential danger for you or for the device.
Under this symbol you can nd important information on how to
avoid injuries and damage to the device.
Danger of electrical shock

10
W 600 Flexio 18V
EN
i
Indicates tips for use and other particularly useful information.
Wear suitable eye protection while working.
Wear a suitable mask while working.
2. General power tool safety warnings
WARNING! Read all safety warnings, instructions, illustrations and specications
provided with this power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury. Save all warnings and
instructions for future reference. The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do
not use any adapter plugs with earthed (grounded) power tools. Unmodied
plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool
will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.