Wali MF002S User manual

INSTALLATION MANUAL
[email protected]
75x75/100x100 32"
MAX
8kgx2
(17.6lbs)x2
RATED
MF002S
Articulating Monitor Desk Stand

2

Supplied Parts List
Step 1
3
Pole
A(x1)
Base
B(x1)
Arm
C(x1)
VESA Plate
D(x2)
Bolt
E(x2)
Bolt
F(x3)
Pole Cover
G(x1)
Allen Key 4mm
H(x1)
Allen Key 6mm
I(x1)
M4x12 Bolt
M-A(x4)
M4x16 Bolt
M-B(x4)
M5x12 Bolt
M-C(x4)
M5x16 Bolt
M-D(x4)
D5 Washer
M-E(x4)
Spacer
M-F(x4)
X 2
NOTE : SOME HARDWARE INCLUDED MAY NOT BE USED
B
H
A
F
Place the Pole Aonto the top center hole of Base B, connect Pole Aand Base Bfrom the bottom using Bolt F
and tighten with Allen Key 4mm H.

4
Step 2
Step 3
F
C
I
A
Put the Arm Cthrough the Pole A, adjust the preferred height and tighten using Allen Key 6mm I.
Press Pole Cover Ginto the top hole of Pole A .A
G

5
Step 4
Step 4.1
D
Step 4.2a
Select M4x12 Bolt M-A or M5x12 Bolt M-C according to your TV/Monitor,connect VESA Plate Dtogether
with D5 Washer M-E into the mounting holes on the back of TV/Monitor,tighten with screwdriver.
(Screwdriver needed but not included)
M-E
M-E
M-C
M-A
G
Step 4.2b
D
M-E
M-F
Select M4x16 Bolt M-B or M5x16 Bolt M-D according to your TV/Monitor,connect VESA Plate D
together with D5 Washer M-E and Spacer M-F into the mounting holes on the back of TV/Monitor,
tighten with screwdriver.(Screwdriver needed but not included)
M-B
M-D