Wali TVDVD-03 User manual

TVDVD-03

(1)TV
(1)headstock-d1 (1) connector-d2 (1) M8 bolt/nut-d3
Plate-a (2)Monitor Bracket-b (1)Support Column-d
(4)M4x12 Bolt-l (4)M4x30 Bolt-m (4)M6x20 Bolt-n (4)M6x35 Bolt-o (4)M8x20 Bolt-p
(4)M4 Spacer-v (8)M6/M8 Spacer-w
(4)M8 Washer-u
(4)M6x10 Bolt-g (3)M8x22 Bolt-i
(1)Plastic Socket-e (1)Metal Pad-f
(1)Allen Key-x
(2)Wire Clip-j (4)Rubber Foot-k
(4)Metal Washer-h
(1)Secuity Wire Kit-y (2)Buckle-z
(4)M8x35 Bolt-q (4)M6 Washer-t(4)M4 Washer-s
(4)M8x50 Bolt-r
(1)Tempered Glass-c
2
Supplied Parts List

xd1
d2 d3 g
3
c
kd
e
i
f
x
1.1
1.2
C
Mounting column,connector and head part
onnecting the Support Column to Tempered Glass
S t e p 1
S t e p 2

a
j
4
Step 4
Mounting TV plate to the headstock
left and right
rotation adjustment
Loosen the preinstalled
screws on headstock
up and down
rotation adjustment
Step 3
s,t,u
l to r
v,w
b
Mounting the Monitor Brackets to a TV
First of all, make sure your TV mounting holes are compatible with size and diameter of the provided Bolt (l to r). Once you have
determined the correct diameter, please see the diagram below. Install the Bolt into the TV using the correct Washer(s,t,u), and
using the spacer(v,w) if necessary. Please make sure the Monitor Brackets are vertically centered and level with each other.
Adjust the monitor brackets to different heights according to your viewing and setup preference.

Attaching the Security Steel Wire to the TV
Step 6
If your TV is positioned close to the wall as shown in Diagram 5a, then a steel wire can be attached for added security.
Attach two ends of the steel wire to the top two holes on the back of TV, shown in Diagram 5b.
Diagram 5a Diagram 5b
Wall
5
Attaching TV To TV Plate and Managing the Wires
Step 5
4.1
4.2
4.3
Safety Bolt
z
Clip Z to the monitor
bracket-b

6
Attach the other end of the steel wire to the wall according to your wall type, shown in Diagram 5c, 5d and 5e.
Diagram 5e
45mm
3.8mm
Wood Stud Wall
Diagram 5c
50mm
8mm
Concrete & Brick Wall
Diagram 5d
Wall