Walker Edison AF20OLI2D User manual



c







L
M
N
Hardware List
）
  
画 

 

  


  
而
 

  


 

0   
｜〉   
 
臼














 


 E
 
 「  『 

Insert dowels (A) into side panles (3)(4) and slat (12). Screw cam bolts (D) into side panels (3,4).

Screw cam bolts (D) into panels (1,9).

Attach side panels (3,4) to the slat (12). Insert cam locks (B) into slat (12) and tighten with a
screwdriver.

Use Hex Key (N), screw (M) to secure the bottom panel (2) to the side panels (3,4).

Slide back panel (5) into groove.

Place the top panel (1) to the side panels (3,4). Insert cam locks (B) into side panels (3,4) and
tighten with a screwdriver.

Secure the back panel (5) by using the plastic wedge (I) and screw (J).

Use Hex Key (N), bolts (H) to secure legs (6) into bottom panel (2).

Use screw (G) to secure the drawer side panels (7,8) into drawer back panel (10).

Slide drawer bottom panel (11) into groove.

Secure handle (E) with bolts (F) into drawer front panel (9).

Attach drawer front panel (9) to drawer side panels (3,4). Insert cam locks (C) into drawer side
panels (3,4) and tighten with a screwdriver.

Place sticker (K) over holes as per diagram.

To insert the assembled drawers inside the unit , tip the front of drawer down and drop the rollers
of the drawer slide runners behind the rollers of slide tracks on the unit . Lift the front of the drawer
up and slide it into the unit.

To insert the assembled drawers inside the unit , tip the front of drawer down and drop the rollers
of the drawer slide runners behind the rollers of slide tracks on the unit . Lift the front of the drawer
up and slide it into the unit.