Walker Edison B40WIL3DR User manual

P.1
Please visitourwebsite forthe mostcurrentinstructions, assembly tips, reportdamage,
orrequest parts. www.walkeredison.com
Revised 14/10/2020(C)
Walker Edison
TM
B40WIL3DR
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.

VIII.Drillmaybeneededforsecuringproduct towall.
GeneralAssemblyGuidelines
I. Ensurethatallpartsandhardwareareavailablebeforebeginning assembly.
II.Followeachstepcarefullytoensuretheproper assemblyof thisproduct.
21
III.Twopeoplearerecommendedforeaseinthe assemblyofthisproduct.
IV.Thethreemaintypesofhardwareusedtoassemblethisproduct are: wood
dowels,screwsand bolts.
V. The provided glueistosecurewooddowelsinplace.When firstinsertingdowels,
locatetheappropriateholeforthedowel,placeasmallamount of glue inthe hole
andinsertthedowel.Wipeawayexcess glue immediately.
Infutureassemblystepswhendowelsarenecessarytoattach assemblyparts
together, place asmall amountofglueonthe endofthedowel beforeattaching
partstogether. Wipeawayexcessglueimmediately.
VI.APhillipsheadscrewdriverisrequiredfortheassemblyof thisproduct .
VII. Power toolsshouldnotbeused toassemblethisproduct.
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved. P.2

P.3
PartsList
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
1
2
3
4
5
6
77
910
11
x 3
12
13
14
15
16
8

P.4
HardwareList
The hardwarequantitieslisted abovearerequiredforproperassembly.
Someextrahardwaremayalsohavebeen included.
Philips head screwdriver required for assembly
(not included)
8x30mm WoodendowelA 20 pcs
6x35mm Cam boltB 20 pcs
15x11mm CamlockC 8 pcs
30mm Sticker
D
20 pcs
6x50mm Screw
E
8 pcs
6x12mm Bolt
F
18 pcs
M4 Hex key
G
1 pc
Handle
H
3pcs
4x19mm HandleBolt
J
6pcs
3x17mm Screw
K
6 pcs
Plasticwedge
L
6 pcs
M
4x32mm Screw
N15 pcs
P
Q
R
S
TDrawerslider 3 sets
*Note: This piececomes preassembled for
shipping purposes and must be disassembled
tocompletethe desk assembly.
Copyright ©2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
15x9mm Camlock 12 pcs
Plasticwedge 7 pcs
Connectingironsheet2 pcs
3x12mm Screw 36 pcs
Gluetube 1 pc

P.5
Step1
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
7
3
A
A
A
A
A
A
A
A
x 2
Insert wooden dowel (A) into parts (3,7) as per diagram.

P.6
Step2
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
56
1
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
Insert wooden dowel (A) into parts (1,5,6), then secure cam bolt (B) into parts (1,5,6) with
Philips head screwdriver as per diagram.

Step3
P.7
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
T
T
Pick up the slider arm (T) and separate the slide runner for the following Steps. Extend the
slide runner all the way forward,press the plastic release lever of the slider arm up and
pull the slide runner complete out .

Step4
P.8
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
x 3
12 13
R
R
R
R
R
R
TT
Using screw (R) attach Drawer slider (T) to parts (12,13) with Philips head screwdriver
as per diagram.

Step5
P.9
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
56
R
R
R
RR
R
R
T
TT
Using screw (R) attach Drawer slider (T) to parts (5,6) with Philips head screwdriver
as per diagram.

P.10
Step6
Copyright 2020, byWalkerEdison FurnitureCo., LLC. All rightsreserved.
RR
R
R
R
RR
R
TT
T
T77
x 2
Using screw (R) attach Drawer slider (T) to part (7) with Philips head screwdriver
as per diagram.