Walker Edison W60C73 User manual

Item #: W60C73
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 11/2010

General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The four main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2

Parts List

Hardware List
Cam lock
Cam bolt
Wood dowel
Glue tube
Bolt
Wrench
Door stopper
Small round head screw
Shelf support pin
Door stopper plate
Small screw
Door hinge
Large screw
Handle
Large round head screw
Medium screw
Plastic wedge
Sticker

Screw cam bolts (B) into stand top (1). Attach door stoppers (G) to stand top (1) using small round head
screws (H).
Screw cam bolts (B) into panels (3,4,5,6). Note that a cam bolt will be screwed into each side of panels (5,6).
Insert dowels (C) into panels (3,4,5,6), slat (7) and shelves (9).
P.5

Insert dowels (C) into shelves (13) and panels (14,15,17,18). Screw cam bolts (B) into panels (14,15,17,18).
Screw cam bolts (B) into doors (16,19). Attach door stopper plates (J) to doors (16,19) using small screws (K).
Attach handles (N) to doors (16,19) using large round head screws (P).
P.6

Attach panels (14,15) to shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves
(13) and tighten with a screwdriver. Note that two cam locks will be inserted into each shelf.
Insert dowels (C) into feet (20) and back panel (10).

Attach panels (17,18) to the second set of shelves (13) using cam bolts and dowels as guides. Insert cam
locks (A) into shelves (13) and tighten with a screwdriver. Note that two cam locks will be inserted into each
shelf.
Attach the shelf assembly from the previous step to door (19) using cam bolts and dowels as guides. Insert
cam locks (A) into panels (17,18) and tighten with a screwdriver.

Insert cam locks (A) into slat (7). Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Tighten
cam locks (A) with a screwdriver.
Attach the shelf assembly from Step 6 to door (16) using cam bolts and dowels as guides. Insert cam locks (A)
into panels (14,15) and tighten with a screwdriver.
P.9

Attach shelf (9) to panel (6), then panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
Attach shelf (9) to panel (5), then panel (3) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
6
6
P.10