Walker Edison TW36RDDL User manual

Using screw (C) attach hinge (D) to parts (1,2) with Philips head screwdriver as per diagram.

Secure large adjustable floor leveler (E) under table bottom as per diagram.

Using screw (C) attach parts (4,5) to part (1) with Philips head screwdriver as per diagram.

Using bolt (A) attach part (3) to part (1) with Hex key (G) as per diagram.
Note: Do not fully tighten all the bolts.

Using bolt (B) attach part (6) to part (3),using bolt (A) secure the other side of part (6) to part (1)
with hex key (G) as per diagram .
Note : Fully tighten all bolts .

Secure small adjustable floor leveler (F) on part (3) as per diagram.