Wallbox PULSAR User manual

Manual
DYNAMIC POWER SHARING

Important Notes
Install the charger following the
instructions listed in the charger’s
Installation Guide.
Only energy meters delivered
by Wallbox are compatible.
Installation must be performed
by qualified personnel only, according
to local regulations.
3.
2.
1.

DE Wichtige Hinweise
PT Notas importantes
NL Belangrijke opmerkingen
SV Viktigt att tänka på
FR Remarques importantes
CA Notes importants
IT Note importanti
ES
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
1.Install the charger following the instructions listed in the charger’s Installation Guide.
2.Only energy meters delivered by Wallbox are compatible.
3.Installation must be performed by qualified personnel only, according to local regulations.
Notas importantes
NO Viktige merknader

Important Notes
Make sure to update your charger
with the latest software version
before installing the meter.
Ensure the charger is powered o
before connecting the meter.
A Standard of Business myWallbox
license is needed.
For more information, refer
to your charger’s guide on Wallbox
Academy.
https://support.wallbox.com/
4.
5.
6.
7.

DE Wichtige Hinweise
PT Notas importantes
NL Belangrijke opmerkingen
SV Viktigt att tänka på
FR Remarques importantes
CA Notes importants
IT Note importanti
ES
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
4. Make sure to update your charger with the latest software version before installing the meter.
5. Ensure the charger is powered o before connecting the meter.
6. A Standard of Business myWallbox license is needed.
7. For more information, refer to your charger’s guide on Wallbox Academy.
Notas importantes
NO Viktige merknader

Summary of
Characteristics
1. Quantity of Primary chargers
(All models except Pulsar and Quasar)
1
5. Communication protocol
between Primary charger and
Power Meter
Modbus RTU
3. Quantity of Energy Meters 1
2. Quantity of Secondary
Chargers
(All chargers)
1-24
4. Communication protocol
between chargers CAN

DE Summary of Characteristics
PT Summary of Characteristics
NL Summary of Characteristics
SV Summary of Characteristics
FR Summary of Characteristics
CA Summary of Characteristics
IT Summary of Characteristics
ES
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1. Quantity of Primary chargers (Any model except Pulsar)
2. Quantity of Secondary Chargers
3. Quantity of Energy Meters
4. Communication protocol between chargers.
5. Communication protocol between Primary charger and Power Meter
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
1
1-24
1
CAN
Modbus RTU
Summary of Characteristics
NO Summary of Characteristics

Summary of
Characteristics
7. Maximum lenght between
Primary charger and Energy Meter 500m
9. Configurable maximum phase
current
Charging
network MCB
6. Maximum Total length
of charging network 250m
8. Terminating Chargers 2
10. Configurable installation
maximum current
Installation mains
switch rated
current

DE Summary of Characteristics
PT Summary of Characteristics
NL Summary of Characteristics
SV Summary of Characteristics
FR Summary of Characteristics
CA Summary of Characteristics
IT Summary of Characteristics
ES Summary of Characteristics
NO Summary of Characteristics
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
6. Maximum Total length of charging network
7. Maximum lenght between Primary charger and Energy Mete
8. Terminating Chargers
9. Configurable maximum phase current
10. Configurable installation maximum current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current
250 m
500 m
2
Charging Network MCB
Installation mains switch rated current

Materials and Tools
Tools
Pulsar
(Secondary only)
Pulsar Plus
Devices
Commander
Commander 2
Copper C Copper SB
Torx T20
Copper SB
D
Torx T9
Pulsar Plus
Commander 2
C
Primary Meter
Cable
(STP Class 5E
500m Max Length)
F
Connecting
Cable
(UTP CAT 5E
250m Max Length)
G
Cutting Pliers
B
Wire
Strippers
E
Philips
Screwdriver
A

DE
A. Philips Schraubendreher
B. Schneidezange
C. Torx T9
D. Torx T20
E. Abisolierzange
F. Empfohlenes Kabel (STP Klasse 5E, max. 500
m Länge)
Materialien und Werkzeuge
PT
A. Chave de parafusos Philips
B. Alicate de corte
C. Chave Torx T9
D. Chave Torx T20
E. Decapantes de fios
F. Cabo recomendado (STP Classe 5E, comprimento
máx. de 500 m)
Materiais e ferramentas
NL
A. Philips-schroevendraaier
B. Kniptang
C. Torx T9
D. Torx T20
E. Draadstripper
F. Aanbevolen kabel (STP klasse 5E, max. lengte:
500 m)
Materialen en hulpmiddelen
SV
A. Stjärnskruvmejsel (Philips)
B. Avbitartång
C. Torxmejsel T9
D. Torxmejsel T20
E. Avisoleringstång
F. Rekommenderad kabel (STP klass 5E, 500 m
maxlängd)
Material och verktyg
FR
A. Destornillador Philips
B. Alicates de corte
C. Torx T9
D. Torx T20
E. Pelacables
F. Cable recomendado (STP clase 5E, longitud
máxima 500m)
Matériaux et outils
CA
A. Tornavís Philips
B. Alicates de tall
C. Torx T9
D. Torx T20
E. Decapadors de cables
F. Cable recomanat (STP Classe 5E, longitud màx.
de 500m)
Materials i eines
IT
A. Cacciavite a croce
B. Pinze da taglio
C. Torx T9
D. Torx T20
E. Pinze spellafili
F. Cavo consigliato (STP classe 5E, lunghezza
max 500 m)
Materiale e strumenti
ES
A. Destornillador Philips
B. Alicates de corte
C. Torx T9
D. Torx T20
E. Pelacables
F. Cable recomendado (STP clase 5E, longitud
máxima 500m)
G. Cable recomendado (UTP CAT 5E, longitud
máxima 250 m)
Materiales y herramientas
NO
A. Philips-skrutrekker
B. Kuttetenger
C. Torx T9
D. Torx T20
E. Vaierstripper
F. Anbefalt kabel (STP-klasse 5E, 500 m maks
lengde)
Materialer og verktøy

Existing Installation
Non-Power Sharing
Power o and carefully open all the
connected chargers.
Perform the steps listed in the section
“Installation of charging network”
of this manual.
Follow the instructions for opening
the charger in the charger’s
installation guide
1.
2.

DE
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
PT
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
NL
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
SV
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
FR
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
CA
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
IT
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
ES
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation
NO
Non-Power Sharing
1. Power o and carefully open all the connected chargers.
2. Perform the steps listed in the section “Installation of charging network” of this manual.
Follow the instructions for opening the charger in the charger’s installation guide
Existing Installation

Existing Installation
Power Sharing
Power o and carefully open only the
primary charger.
Follow the instructions for opening
the charger in the charger’s
installation guide.
Perform the steps listed in the Cabling
network section of this manual.
For more details, refer to the Power
Sharing Smart Manual.
1.
2.
3.

DE
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
PT
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
NL
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
SV
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
FR
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
CA
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
IT
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
ES
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation
NO
Power Sharing
1. Power o and carefully open all the connected chargers.
Follow the instructions for opening the charger in the charger’s installation guide
2. Perform the steps listed in the section “Installation of charging network” of this manual.
3. For more details, refer to the Power Sharing Smart Manual.
Existing Installation

New Installation
Positioning the chargers
The Primary charger communicates
with the Secondary chargers through
a cabling system that connects the
chargers in a chain: one charger
is connected to the next one.
Chargers at the beginning and end
of the chain must be configured
as Terminating (T) chargers
Chargers between the terminating
chargers must be configured as non-
terminating (NT) chargers
Each charger includes an electric
element that defines whether it is a T
or NT charger
1.
2.
3.
4.

DE
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
PT
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
NL
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
SV
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
FR
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
CA
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
NoNew Installation
IT
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
ES New Installation
NO
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger
New Installation
Positioning the chargers
1. The Primary charger communicates with the Secondary chargers through a cabling system that
connects the chargers in a chain: one charger is connected to the next one.
2. Chargers at the beginning and end of the chain must be configured as Terminating (T) chargers
3Chargers between the terminating chargers must be configured as non-terminating (NT) chargers
4. Each charger includes an electric element that defines whether it is a T or NT charger

New Installation
Copper Family
Pulsar &
Commander
Pulsar Plus
Defined by the position of a
switch on the control board
Only for Pulsar and Commander.
A specific Part Number must be specified when
ordering the unit.
NT option is Indicated with a -P- in the Part Number
WBXX-X-X-X-P-XXX-X
Pre-defined
Factory Setting
Commander 2
T NT NT NT T
3.
1. 2.

DE
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
PT
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
NL
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
SV
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
FR
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
CA
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
IT
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
ES
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation
NO
1. Defined by the position of a switch on the control board
2. Pre-defined Factory Setting
3. Only for Pulsar and Commander.
A specific Part Number must be specified when ordering the unit.
Indicated with a -P- in the Part Number WBXX-X-X-X-P-XXX-X
New Installation

Placement
Install the energy meter after the main
switch and before the division in sub-
circuits.
Follow the manufacturer’s
instructions to install the energy
meter.
1.
Install the Primary charger according
to the Installation Guide and connect it
to the energy meter.
2.
Connect the secondary chargers
as described in the Installation section
of this manual.
3.
The Energy Meter is connected only
to the Primary Charger
4.
Connect the energy meter to the
primary charger using the lower cable
entry-apertures.
5.