Warmlite WL44004 Mounting instructions

www.warmlite.co
2000W
FLAT FAN HEATER
MODEL WL44004/WL44004DT
YOUR SAFETY &
INSTRUCTION MANUAL
PLEASE READ CAREFULLY
WARNING!
This product is only suitable for well insulated spaces or occasional use.

2
CUSTOMER SUPPORT TEAM: [phone]
TECHNICAL DATA
Description: Flat Fan Heater
Model: WL44004
Rated Voltage: 220 - 240V
Frequency: ~ 50Hz
Power consumption: 2000W
DOCUMENTATION
We declare that this product conforms to the following product legislation in accordance with the
following directive(s):
2014/30/EU Electromagnetic Compatibility Directive.
2014/35/EU Low Voltage Directive.
2011/65/EU Restriction of Hazardous Substances Directive.
RK Wholesale LTD Quality Assurance, United Kingdom
WARRANTY
This product is guaranteed for 12 months from the date of original purchase. If any defect arises due
to faulty materials of workmanship, the faulty products must be returned to the place of purchase.
Refund or replacement is at the discretion of the retailer.
The following conditions apply:
• The product must be returned to the retailer with proof of purchase.
• The product must be installed and used in accordance with the instructions contained in this
instruction guide.
• It must be used only for domestic purposes.
• It does not cover wear and tear, damage, misuse or consumable parts.
• RK Wholesale LTD has limited liability for incidental or consequential loss or damage.
• This guarantee is only Valid in the UK and Eire Only.
An extended warranty is available for this appliance.
See back page for details.

3
www.warmlite.co
WARNING:
This appliance is double insulated.
Do not connect any wire to the earth terminal.
WIRING SAFETY FOR UK USE ONLY
IMPORTANT
As the colours in the mains lead of this
appliance may not correspond with
the coloured markings identifying the
terminals in your plug, please proceed as
follows:
The wires in the mains lead are coloured
in accordance with the following code:
Blue neutral [N] Brown live [L]
Plug Fitting Details (Where Applicable).
The wire coloured blue is the neutral
and must be connected to the terminal
marked [N] or coloured black.
The wire coloured brown is the live wire
and must be connected to the terminal
marked [L] or coloured red.
On no account must either the brown
or the blue wire be connected to the
[EARTH] terminal .
Always ensure that the cord grip is
fastened correctly.
The plug must be fitted with a fuse
of the same rating already fitted and
conforming to BS 1362 and be ASTA
approved.
If in doubt consult a qualified electrician
who will be pleased to do this for you.
Non-Rewireable Mains Plug.
If your appliance is supplied with a non-
rewireable plug fitted to the mains lead
and should the fuse need replacing,
you must use an ASTA approved one
(conforming to BS 1362 of the same
rating).
If in doubt, consult a qualified electrician
who will be pleased to do this for you.
If you need to remove the plug –
disconnect it from the mains – and
then cut it off of the mains lead and
immediately dispose of it in a safe
manner. Never attempt to reuse the plug
or insert it into a socket outlet as there is
a danger of an electric shock.
Fuse
Neutral
(Blue)
Live
(Brown)

4
CUSTOMER SUPPORT TEAM: [phone]
PRODUCT SAFETY
When using any electrical appliance, basic safety precautions should
always be followed including the following:
• Check that the voltage of the
main circuit corresponds with
the rating of the appliance
before operating.
• If the supply cord or appliance
is damaged, stop using the
appliance immediately and seek
advice from the manufacturer,
its service agent or a similarly
qualied person.
• DO NOT let the cord hang over
the edge of a table or counter or
let it come into contact with any
hot surfaces.
• DO NOT carry the appliance by
the power cord.
• The use of accessory
attachments is not
recommended by the appliance
manufacturer apart from those
supplied with this product. DO
NOT use extension cords with
the appliance.
• DO NOT pull the plug out by the
cord as this may damage the
plug and/or the cable.
• Switch o at the wall socket
then remove the plug from
the socket when not in use or
before cleaning.
• Switch o and unplug before
tting or removing tools/
attachments, after use and
before cleaning.
• Close supervision is necessary
when any appliance is used by
or near children.
• Children should not play with the
appliance.
• This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical, sensory or
mental capabilities or lack of
experience and knowledge
if they have been given
supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.
• Cleaning and user maintenance
should not be undertaken by
children without supervision.
• Take care when any appliance is
used near pets.
• DO NOT use this product for
anything other than its intended
use.
• This appliance is for household
use only.
• Please ensure that the appliance
is used on a stable, level, and
heat resistant surface.
• DO NOT immerse cords, plugs
or any part of the appliance in
water or any other liquid.

5
www.warmlite.co
HIGH VOLTAGE HOT SURFACE DO NOT COVER
• This appliance is for household
use only.
• DO NOT use the appliance
outdoors.
• Always ensure that the heater is
placed on a rm level surface.
Ensure that the heater is not
positioned close to curtains,
furniture or any combustible
materials as this could create a
re hazard.
• The heater must not be located
immediately below a mains
socket outlet.
• This product is only suitable
for well-insulated spaces and
occasional use.
• DO NOT cover the heater as this
may lead to a re risk.
• DO NOT obstruct any of the
openings of the heater.
• DO NOT insert any object
through any openings on the
heater.
• Check all inlets and outlets from
time to time for accumulated
dust.
• DO NOT use the heater in
areas where ammable liquids
are stored or where ammable
fumes may be present.
• DO NOT operate the heater on a
timer, or leave on overnight.
• When not being used, please
unplug the heater from the
mains socket.
• Keep the mains lead away from
the hot body of the heater and
ensure that it is not pulled tight
between the socket and the
heater.
• DO NOT use the heater in the
immediate surroundings of a
bath, a shower, a swimming
pool or similar indoor locations.
• Always unplug the heater and
allow it to cool before moving it
from one location to another.
• DO NOT attempt to dismantle
or repair any part of the heater.
This should only be done by a
qualied service agent..
• In the unlikely event the
appliance develops a fault,
stop using it immediately and
seek advice from the Customer
Support Team.

6
CUSTOMER SUPPORT TEAM: [phone]
2
3
1
4
WHAT’S IN THE BOX
Instruction Manual
Flat Fan Heater
1. Inlet Vent
2. Temperature Control
3. Heat Setting Control
4. Outlet Vent
BEFORE YOUR FIRST USE:
1. Remove your appliance from the packaging.
2. Locate your appliance in accordance with the safety instructions.
3. Plug the appliance into the mains supply.
4. Your appliance is now ready for normal use.
Dispose of the packaging in a responsible manner.
WARNING!
This product is only suitable for well insulated spaces or occasional use.

7
www.warmlite.co
USING YOUR APPLIANCE
1. Ensure that the appliance is sited away
from furniture curtains and the power
cable will not cause a trip hazard.
2. Unwind the Power Cord and plug it into
the Power Outlet and switch on at the wall
socket.
3. To activate the heater, turn the Heat
Setting Control clockwise. Turn it to the
rst setting for the fan function.
4. Turn the Heat Setting Control dial
clockwise to the second setting for low
power (1000W), and to the third setting
for maximum power (2000W).
5. Turn temperature control dial clockwise to
increase the temperature and when the
temperature has reached a comfortable
level slowly turn the temperature control
dial anti clockwise until the thermostat
indication light goes out.
AUTO SAFETY CUT OFF
The heater has a built-in safety device, which
will switch the heater o in case of accidental
overheating.
To reset the heater, follow the next steps:
1. Turn the dials o.
2. Unplug the heater and wait 5-10 minutes
for the unit to cool down.
3. After the unit has cooled, plug it in and
operate normally.
CLEANING AND CARE
• Be sure to switch o power supply at
the wall socket and disconnect the plug
before commencing cleaning.
• Wait for the heater to cool down fully
before commencing cleaning.
• ONLY Clean the body of the heater with a
damp cloth.
• DO NOT ALLOW water into the appliance.
• Never use soap or chemicals which may
damage the housing of the heater.
• Allow sucient drying time before
operating again.
• Clean the air inlets and outlets regularly
with a vacuum cleaner (at least twice a
year).
• When the unit is not in use. We
recommend that the heater is re-packed
in its original packaging and stored in a
cool, dry place.
WARNING:
DO NOT IMMERSE ANY ELECTRICAL PART
OF THE APPLIANCE IN WATER SUCH AS
MOTOR UNITS OR PLUGS.
PLEASE SEE CLEANING SECTION FOR
FURTHER INSTRUCTIONS.
DISPOSAL OF THE UNIT
Appliances bearing the symbol shown here
may not be disposed of in domestic rubbish.
You are required to dispose of old electrical
and electronic appliances like this separately.
Please visit www.recycle-more.co.uk or
www.recyclenow.co.uk
for access to information about the recycling
of electrical items.
Please visit www.weeeireland.ie for access to
information about the recycling of electrical
items purchased in Ireland.
The WEEE directive, introduced in August
2006, states that all electrical items must be
recycled, rather than taken to landll.
Please arrange to take this appliance to your
local Civic Amenity site for recycling, once it
has reached the end of its life.

8
CUSTOMER SUPPORT TEAM: [phone]
Model Identifier(s): WL44004/WL44004DT
Item Symbol Valve Unit Item Unit
Heat Output Type of heat input for electric storage, local space
heaters only (select one)
Nominal heat
output Pnom 1,8 –2,0 kW Manual heat charge with integrated thermostat No
Minimum heat
output (indicative) Pmin 0.015 kW Manual heat charge control with room and/or outdoor temperature feedback No
Maximum
continuous heat
output
Pmax, c 2 kW Electronic heat charge control with room
and/or outdoor temperature feedback No
Auxiliary electricity
consumption Fan assisted heat output No
At nominal heat
output elmax 0 kW Type of heat output/room temperature control (select one)
At minimum heat
output elmin 0 kW Single stage heat output and no room temperature control No
In standby mode eISB 0 kW Two or more manual stages, no room
temperature control No
With mechanic thermostat room temperature
control Yes
With electronic room temperature control No
Electronic room temperature control plus day
timer No
Electronic room temperature control plus
week timer No
Other control options (multiple selections possible)
Room temperature control with presence
detection No
Room temperature control with open
window detection No
With distance control option No
With adaptive start control No
With working time limitation No
With black bulb sensor No
Contact Details: Imported by RK Wholesale LTD., Berryhill Road, Stoke-on-Trent ST4 2NL

9
www.warmlite.co
NOTES

10
CUSTOMER SUPPORT TEAM: [phone]
NOTES

11
www.warmlite.co
NOTES

0220.V5
We hope you enjoy your appliance for many years.
As a thank you for purchasing one of our fantastic products,
we are oering you an extra 1 year peace of mind.
*To receive your extra guarantee period, register your appliance online
within 28 days of purchase by visiting:
www.warmlite.co
Make sure to retain your original receipt.
Should you have a problem
with your appliance or need any spare parts please call our
Customer Support Team on:
[phone]
Distributed throughout the UK by RK Wholesale LTD