Warn 28070 User manual

WARN INDUSTRIES Page 1 33054 Rev. A0
INSTALLATION INSTRUCTIONS
RECEIVER KIT
for Ford Full Size
Part Number 28070
NOTE: Please read these instructions thoroughly before starting the installation of this kit.
Minor modifications may be required due to variations between vehicles.
1. Remove bumper from vehicle as shown in Figure 1 DO NOT REMOVE factory bumper bracket.
FIGURE 1

WARN INDUSTRIES Page 2 33054 Rev. A0
2. Install the Receiver in front of the factory bumper bracket as shown in Figure 2.
3. Using the holes in the Receiver as guides, drill a 1/2" hole thru the frame in all locations shown in
Figure 2 and secure with supplied fasteners. Use spacer washers between Receiver and frame rail if
necessary.
4. Now reinstall bumper and secure all fasteners.
FIGURE 2